Four major problems with wood products

The quality of the construction of wood products and the quality of materials will directly affect the quality of the decoration of the entire family. In home decoration, the use of wood products accounts for about 30% of the entire decoration. Such as: wooden doors, wooden lines, wooden keels, wood boards, plywood, MDF, etc. , the quality problems of general wood products mainly have the following aspects.

1. Drying is not in place

The drying treatment of wood is a complicated process, the quality of the treatment is good or bad, and it has a great influence on the quality of wood products. Generally, good quality wood products are dried for a long time, and then manually dehumidified drying process different materials from each other are the same, if not advanced equipment, large spaces and skilled technique, even after drying In the end, there will be many quality problems.

2. Moisture content is not up to standard

It should be seen whether the workmanship of its wood products meets certain standards, for example, whether the thickness and width are consistent, and whether it is smooth to the touch. In fact, when choosing wood products, the most important thing is to look at the moisture content of the material itself. Generally, the moisture content of wood products in the northwestern region should be controlled at about 8% -10%. . When buying wood products, you should request a test report from the dealer or conduct on-site inspection.

3. Not tightly closed

If the wood product after drying treatment is not tightly closed, it will deform and swell after being eroded by water for the second time. Therefore, when the wood product enters the decoration construction site, it should not be exposed to the air for too long. Otherwise, the above quality problems will occur .

4. Quality is not enough

In the decoration process, it is also crucial to choose good wood products. Under normal circumstances, when consumers choose wood products, it is best to choose manufacturers with high credibility and good reflection, because the product quality of regular wood product manufacturers will have certain guarantees . In addition, the selection should also see whether the texture of its wood products is clear and whether there are traces of repairs such as insect eyes and cracks.

Tee used for the piping system connection. Also known as pipe tee , straight tee or tee fitting,steel tees,  a branch in the  the main pipe. There are T-shaped and Y-shaped, Equal Tee and Reducing Tee, collect three branch pipe to the  main pipe. The main role of the tee is to change the direction of flow. forming process:Hydroforming, hot pressing, cold forming.

Steel Tee

Steel Tee,Stainless Steel Tee ,Carbon Steel Butt Weld Tee,Reducing Tee

CANGZHOU HAOYUAN PIPE FITTINGS MFG CO.,LTD , https://www.pipefitting-china.com