What is the difference between solid wood furniture and board wood furniture ? Solid wood furniture refers to furniture made of natural wood, and the beautiful patterns of wood can generally be seen on the surface of such furniture. Furniture manufacturers generally pay attention to the varnish or matt paint on solid wood furniture to express the natural color of wood.
What are the forms of solid wood home?
One is pure solid wood furniture . That is to say, all the furniture materials are made of solid wood, including tabletops, wardrobe door panels, side panels, etc. are made of pure solid wood, without using any other form of artificial board. Pure solid wood furniture has high requirements on craftsmanship and materials. The selection of solid wood, drying, finger jointing, jointing and other requirements are very strict. If any process is not strictly controlled, small cracks, loose joints, etc. will occur, and the entire set of furniture will be deformed, making it impossible to use.
The other is imitation solid wood furniture . The so-called imitation solid wood furniture is solid wood furniture from the appearance. The natural texture, feel and color of the wood are exactly the same as solid wood furniture, but it is actually a combination of solid wood and artificial board furniture, that is, side panel top, bottom, shelf and other components Use particleboard or MDF fiberboard with veneer veneer. The doors and drawers are made of solid wood. This process saves wood and reduces costs.
What is panel furniture?
Panel furniture refers to furniture made of medium-density fiberboard or particle board for surface veneering and other processes. A large part of this type of furniture is wood grain simulation furniture. At present, the veneers of some panel furniture sold on the market are becoming more and more realistic, the gloss and feel are good, and the products with fine craftsmanship are also very expensive.
Different characteristics
What are the advantages and disadvantages of solid wood furniture and panel furniture? In general, solid wood furniture is increasingly favored because it caters to people's psychology of returning to nature. The defect of solid wood furniture is that it is easily deformed due to changes in water content. Care needs to be taken. If it is not allowed to be exposed to sunlight, not too cold or extremely hot, too dry and humid environments are not suitable for solid wood furniture. Once the manufacturers are not strict, it is easy to make inferior products into consumers' homes.
   Panel furniture is popular because it has a variety of veneers, which can give people a variety of colors and textures. Panel furniture also has the characteristics of not easy to deform. And because it has the characteristics of disassembly and assembly, it is loved by many people. The disadvantage of panel furniture is that some manufacturers use chipboard and other materials to produce, and if the veneer is not fully covered, it is easy to release formaldehyde that is harmful to the human body.
How to overcome the shortcomings of solid wood and panel furniture? The easiest way is to buy products from famous manufacturers. The products of some excellent manufacturers are often subjected to strict drying treatment on solid wood furniture to keep the wood moisture content within a limited range. Such furniture is not easy to deform and the after-sales service is guaranteed. In addition, famous manufacturers choose plates that meet the environmental protection requirements for panel furniture, and most of the veneers have been perfected. Good edge banding makes the gas diffusion of panel furniture reach the minimum level and does not cause any harm to the human body. Consumers should pay attention when buying, you can open the cabinet door or drawer to smell, if there is a strong irritating smell, it is mostly formaldehyde exceeding the standard, it is not suitable to buy.
Distinguished
How to identify whether a cabinet door or partition is made of solid wood? A glimpse of the mystery of solid wood: wood grain and scars. This is a method disclosed by insiders to identify whether the whole piece of solid wood. For example, a cabinet door looks like a pattern on the outside, then look at the corresponding pattern on the back of the door corresponding to the position where the pattern changes. If it corresponds well, it is a solid wood cabinet door. In addition, looking at the scar knot is also a good way to identify pure wood: look at the location of the side with the scar, and then look for the corresponding pattern on the other side.
Â
The quality of the craft and the price of solid wood directly affect the price of solid wood furniture . Therefore, the choice of solid wood furniture depends on the material. For example, mahogany, different tree species have different prices. For example, the price of rosewood is better than rosewood. For red beech, the price of imported red beech is much higher than that of domestic red beech. There are also white oak, maple, teak, ash, oak, elm and miscellaneous wood. The higher the grade of solid wood used and the better the craftsmanship, the higher the price of its furniture. Generally speaking, in terms of price, the price of the same kind of wood, all solid wood furniture is much higher than the price of imitation solid wood and artificial board combined furniture. However, the price of some panel furniture with excellent workmanship and novel styles may also far exceed the price of solid wood furniture with rough workmanship.
Tips for recognizing the board style: How do you know whether the material of the panel furniture is medium-density or particle board in the hinge groove and the punching area? One of the best ways is to carefully observe the hinge groove and the punching area, exposing the internal structure, so you can see Whether to use particleboard or MDF. (Litian)
Our company produces a vary of specifications of Glass Particles and glass-lumps which can be used in ordinary pavement of road to shorten braking distance effectively, to improve the warning role and to decelerate in advance to achieve safety. Pavement laid with this product will not peel off and maintain function well after a long time wheel friction.
It is also used in the decoration of building outer-walls and all kinds of ceramic. There is mainly 1-2 mm, 2-3 mm, 3-4 mm, 600-850 microns, 300-600 microns, 180-300, and less than 180 microns etc. as well customized specifications customers require.
The glass bead can be produced based on the standard of countries or areas, such as EN1423/1424, AASHTO M247, BS6088, JIS R3301 and KS L2521 etc.
Glass Particles
Glass Particles,Plastic Glass Particles,Color Fireproof Glass Particles,Crushed Colored Glass Particles
CHIYE GLASS BEAD (HEBEI) CO., LTD , https://www.chiyeglassbeads.com