How to maintain solid wood furniture most effectively

 

How to maintain solid wood furniture, new mahogany furniture will sometimes make a sudden noise, as long as the maintenance is done according to the above requirements, there will be no problem. The noise is a normal phenomenon caused by the shrinkage of the furniture panel. After the furniture has been used for a winter, the manufacturer can be repaired and restored to its new look.

Solid wood furniture maintenance method 1: When placing the furniture, pay attention to stay away from heat sources, at least about 1 meter. If the mahogany furniture is too close to the heat source, it will quickly cause the moisture in the furniture wood to evaporate, which will cause the joints and tenons of the furniture to shrink, causing deformation of the tenon and cracking of the panel. Therefore, it is best to rub beeswax on the back and inside of the furniture.

Solid wood furniture maintenance method two: increase indoor humidity as much as possible. If you often wipe the ground with a damp cloth or use a humidifier or fish, this is good for people and furniture.

Solid wood furniture maintenance method three: the mahogany furniture should be placed flat and upright, not on four legs on a flat surface. The whole furniture should be kept perpendicular to the ground, otherwise it is easy to cause deformation of the whole furniture and the door, etc., and eventually the seam will be opened and the service life of the furniture will be shortened.

Solid wood furniture maintenance method 4: Do not use a damp cloth to wipe the furniture dust. The dust on the surface of the furniture should be gently brushed off first, and then wiped with a dry cotton cloth to prevent the particulate dust from damaging the surface of the furniture.

Solid wood furniture maintenance method 5: It is best to move the solid wood furniture when moving, do not pull hard, otherwise it will easily cause splitting of the lower end of the legs and feet.

Maintenance method 6 for solid wood furniture: For furniture with drawers, it is recommended to put a few drops of wax on the bottom of the drawer or the drawer, which will reduce friction and extend the service life of the furniture.

How to maintain solid wood furniture Seven: It is best not to place mahogany furniture directly beside utensils with high humidity.

(Source: Jiuzheng Building Material Network Editor: Peter)

The Magnetic Badge is made of strong Neodymium Magnet , double sided foam adhesive and steel / plastic plate.

This is a magnetic badge are used to fix name plate to position. The application of magnetic badge is very simple and covenient, just paste the adhesive onto the name plate, the name plate will firmly stick on your clothe.

Shine magnetics is a manufacturer of neodymium magnet and magnetic products. The neodymium magnet is our own made thus we can control the quality and price for customers.

Magnet Badge

Neodymium Magnet Badge

Magnet Badge, Magnetic Badge, Strong Magnet Badge, Neodymium Magnet Badge, Magnet Badge For Name Plate

NINGBO SHINE MAGENETIC TECHNOLOGY CO.,LTD , https://www.shinemagnets.com