Hidden across the sea sticker door selling stickers leather door price
In order to cut corners and cut corners, some economical solid wood composite doors will be filled with a whole piece of wood near the door lock and hinges, while other places use inferior wood. Because installing the door lock requires digging holes, consumers can see the material inside the wooden door, so that the configuration can cover the sky.
Another way to hide from the sky is to describe the surface sticker wooden door as a wooden door with wood veneer. The texture of the surface of the wood grain paper is very similar to the real wood grain texture. The average consumer cannot see it without carefully discerning it. However, the prices of the two are very different. Wood grain paper of the same area is three to four hundred yuan cheaper than wood veneer. If "unfortunately" is recognized by consumers, businesses will use "this is technical paper" to quibble.
Countermeasure: According to the person in charge of Fulinmen Wood Industry, the grain of wood grain is relatively dull and even. Several wooden doors with the same sticker are lined up together, and the grain will show consistency. If it encounters a groove, the paper will be more round and docile; and There will be scars, spots, black lines and other phenomena on the veneer. When several doors are put together, the grain will definitely be inconsistent. If the veneer encounters a groove, it will neither be round nor obedient.
Cut corners and cut the paint process in half
All sets of wooden doors on the market are made of PU paint. Generally speaking, PU paints have to go through color-finding, six procedures such as three bottoms and two sides, and some brand wooden doors will even do seven procedures. However, there are only two or three procedures in some doors on the market, and at least 50 yuan can be saved by painting less.
Countermeasures: Look at the finish of the paint. For a wooden door with few processes, the paint film must not be full and thick, and it will not effectively protect the surface of the wooden door. And when the real process arrives, the paint film must look full, rich, and have a smooth finish.
Stealing beams for columns and solid wood doors
When consumers choose wooden doors, they tend to focus too much on the door leaves, ignoring the door cover and the door edge. Some profiteers will use different materials for the door cover and the door leaf. The normal method is to make the door cover made of wood, plan and straighten it, and then assemble and install it on the wall, and then cover the base board and decorative panel. However, in the current market, some inferior door covers are not treated as a base layer, and a very thin decorative panel is directly affixed to the surface. It is difficult to completely bond the plate and the wall. In addition, some vendors claim to be solid wood edges when selling goods, but they often use wood-plastic instead.
Ordinary wood-plastic materials and solid wood edge materials are not carefully observed, and their appearance is almost the same, but the price is very different. One meter of wood-plastic materials are between 60 yuan and 80 yuan, while solid wood edge materials are more than 100 yuan.
Countermeasure: When accepting the package door project, you can knock on the side panel of the door and window cover by hand. If there is a hollow drum sound, it means that there is no base board such as blockboard in the bottom layer, which should be removed and redone. When buying, ask the merchant what kind of material is the door cover and door line. When they think you are an expert, they dare not deceive you easily.
It ’s not easy to install because it ’s improperly measured in thousands of miles
It is understood that the current wooden door industry is very lack of excellent installation workers, so installation problems caused by improper measurement are very common. According to the person in charge of Fulinmen Wood Industry, there are several factors to be noted when measuring the door. The first is the width of the door. Because the wall is not straight, at least the bottom, middle and top are measured when measuring the width. Take the narrowest value; then the thickness of the door cover. For the same reason, because the wall is not straight, the bottom, middle and top positions should also be measured to take the largest value. If you make a mistake or only measure one place, it may be impossible to install due to an error of 0.5 cm, and sometimes even hit the wall to install it.
More furniture information is at http://news.gojiaju.com/
Welcome to provide news interview clues  Advertising / News Hotline: 0512-82278555 to 8004
QQ
JIC hdyraulic adapter is a very common connection in fluid power applications. Both the male and female fittings have 37° seat. The seal takes place between the male flare and female cone seat. The threads hold the connection mechanically.
Inculde: ORFS Adapters fittings
JIC 74° Cone Flared Tube A hydraulic fitting and adaptersNPT Thread Adapters
American Tee Adapter fitting
American Hydraulic Adapter,Hydraulic Hose Adapters,Hydraulic Adapter Fitting,Hose Fittings And Adapters
SHIJIAZHUANG TOPA TRADING CO., LTD. , https://www.topahydraulic.com