When the hinge is installed, whether the embedded cabinet panel is opened and closed several times a day, the hinge not only needs to connect the door panel of the cabinet, but also bears the weight of the door panel alone. The high-quality hinge will open continuously under the weight of the door panel of more than ten kilograms. Tens of thousands of times to ensure that the door panel does not sink. According to the professional introduction of Igor Rey, when looking at the hinge, the color is first observed, the quality hinge looks like the texture, the thickness is about 1mm; the second one depends on the installation, because the screw is easier to loosen, Therefore, when the brand cabinet is installed, it will be drilled into the embedded nylon expansion tube in the cabinet body. The screw is screwed into the embedded part and tightened tightly. Even if the embedded part is broken, it can be replaced. Non-branded cabinets have no embedded parts, and the time is long. It is more difficult to repair after the screws are loose.
The reporter learned that some brand cabinets will also cooperate with foreign hinge manufacturers, and consumers can look at the hinges for product identification when they choose. The high-quality hinge can be opened more than 90 degrees, can be stopped at any angle, and can be automatically closed at 15 degrees.
The sides of the drawer rails must be leveled at present. The more common ones on the market are the â€œiron plate sliding railâ€ and the â€œdamping pumping railâ€. The general load-bearing weight of the iron plate sliding rail is about 35 kg, and the damping pumping rail is between 45 kg and 70 kg, which not only pulls silent, but also increases the bearing capacity.
According to the experts of Eagle Tell, the damper suction rail can reduce the noise caused by severe mechanical collisions and prevent premature aging of metal parts, and has the function of automatically removing dust.
If the problem with the rails is not only the quality of the product, but also because of improper installation, it is likely that the sides are not leveled. Generally, it is still difficult to judge the quality of the slide rails by the naked eye of the consumer and the short-time experiment on the spot. The only effective way is to buy the brand products in the regular store. Many brands choose to cooperate with the foreign slide producers. There is still a certain gap between the slide rails and the foreign brands. To ensure that the drawers can be pushed and pulled for a long time, you can also choose imported brands with superior performance.
The variety of baskets to be tailored to the basket is a major feature of the cabinet, but if the design does not meet the daily habits of people will also bring trouble. The basket has a large storage space, and can reasonably divide the space, so that various items and utensils "have their place", and can fully utilize the space at the corner to maximize the use value.
The reporter learned that, according to different purposes, the basket can be divided into a stove pull basket, a three-sided pull basket, a drawer pull basket, a dish pull basket, a high deep pull basket, a corner pull basket and the like. The stove pull basket, as the name suggests, is generally placed under the cooktop, with easy-to-access dishes and plates; the drawer basket is relatively small, can accommodate colander, shovel, etc.; high-deep basket is high, the inner compartment can be moved The capacity is large; the corner basket is suitable for cabinets with a relatively large area. At the time of purchase, consumers are better off introducing their business habits to the merchants and letting the merchants help you choose the type of basket that best suits your home.
The skirting board should choose non-wood skirting boards as much as possible. Generally, the merchants will use ABS materials and stainless steel materials to make the feet to support the cabinet body, and then cover the corners with the skirting boards to make the cabinet style uniform.
At present, the skirting board has a type of wooden skirting board, PVC skirting board, aluminum alloy skirting board and the like. Wooden skirting board manufacturers generally use the corner scrap left when the cabinet is used, and the cost is low, but because the skirting board is close to the ground, the wooden material is easy to absorb moisture. Aluminum alloy skirting boards and PVC skirting boards are waterproof, moisture-proof, mold-free, and rust-free. However, aluminum alloy skirting boards are expensive, and PVC skirting boards are relatively economical. Consumers can choose suitable skirting boards according to actual conditions.
The protective film is extended under the basin to extend the life. The basin is a very high-frequency object in the kitchen, so its choice is also very important. Most of the common basins are stainless steel, artificial stone, ceramics, stone products, depending on the owner's preferences and the overall style of the kitchen. If the style of the kitchen is more fashionable and avant-garde, it is more suitable to use stainless steel basins. In order to prevent the water tank condensate naturally generated due to temperature changes from immersing in the cabinet, the brand cabinet will prepare an aluminum embossed waterproof protective film on the bottom surface of the cabinet below the basin to extend the life of the cabinet. When purchasing the cabinet You can see if the product has this protective film.
Sealing aluminum sealing to ensure long-term non-deformation of the separator edge cracking is also a problem that the readers reflect more concentrated. The front panel of the brand cabinet is generally covered with aluminum, the metal texture is strong, preventing the articles from slipping, preventing the articles in the cabinet. The edge of the partition slides off.
Another place is the dust-proof corner. We know that the corners of the cabinet are easy to fall and it is difficult to clean. The brand cabinets will have a transparent, soft-touch, anti-dead device made of reactive silica gel at the corner of each cabinet. It is easy to clean and is very safe.
DUPLEX STAINLESS STEEL
Duplex Stainless Steels Available
Yuhong Group supplies LDX2101, 2205, Ferralium 255, Zeron 100 and LDX2507 in the form of plate, sheet, strip, bar, pipe, tubing, pipe fittings, flanges and weld wire.
Duplex Stainless Steel Overview
Duplex Stainless Steels, also referred to as austenitic-ferritic stainless steels, are a family of grades with about equal proportions of ferrite and austenite. These steels have a duplex microstructure which contributes to their high strength and high resistance to stress corrosion cracking. Due to their high content of chromium, nitrogen and molybdenum, duplex steels offer good resistance to local and uniform corrosion. Duplex stainless steels have good weldability.
Today, modern duplex stainless steels can be divided into three groups:
Lean Duplex such as LDX2101
Standard Duplex such as 2205, the work-horse grade accounting for more than 80% of duplex usage
Super Duplex such as Ferralium 255 and Zeron 100 and LDX2507
Of the duplex grades, duplex 2205 is the most widely used. However, the super duplex steels like ZeronÂ® 100 and LDX2507 are excellent for servicing severe corrosive environments, such as offshore and marine applications. Lean duplex 2101 is available as an economic alternative to 300 series stainless steels.
What are the Characteristics of Duplex Stainless Steels ?
Very good resistance to uniform corrosion
Very good resistance to pitting and crevice corrosion
High resistance to stress corrosion cracking and corrosion fatigue
High mechanical strength
Good sulfide stress corrosion resistance
Good abrasion and erosion resistance
Good fatigue resistance high energy absorption
Low thermal expansion
In what Applications are Duplex Stainless SteelsÂ® used ?
Oil and gas equipment
Seawater desalination plants
Chemical industry, especially when handling chlorides
Desalination plants and seawater systems
Pulp and paper industry
Cargo tanks and pipe systems in chemical tankers
Firewalls and blast walls on offshore platforms
Pressure vessels, reactor tanks, and heat exchangers
Rotors, impellers and shafts
Super Duplex Stainless Steel Heat Exchanger Tube,Super Duplex Heat Exchanger Tube,Super Duplex Metal Heat Exchanger Tube
YUHONG GROUP CO.,LIMITED , https://www.jessro-pipefittings.com