Today, wood flooring has become the first choice for many consumers to decorate floor materials. So how to maintain the wooden floor to make it last longer?! Let's take a look at today's solid wood floor maintenance tips!
1. After the floor is laid, it needs to be used for 24 hours before use, so as not to affect the use effect of the floor;
2. After the floor is paved, it should be stayed within two weeks. In a room where people do not live for a long time or do not live frequently, put a few pots of water in the room and keep the amount of water, or use a humidifier to make up for the evaporation of water due to the opening of the indoor heating; the southern rainy season should be ventilated; the indoor environment should not be too Dry, not too moist, to prevent cracking, shrinkage or expansion deformation of the wooden floor.
3. Keep the floor dry and clean and avoid contact with large amounts of water. It is not allowed to scrub with corrosive liquid such as alkaline water or soapy water to avoid damaging the paint film. It can be wiped with a wrung cotton swab. It should not be wiped with wet mop, gasoline, flammable materials and high temperature liquid.
4. Don't throw cigarettes or matches and other fires on the floor to avoid burning the floor surface; avoid sharp, sharp objects and heavy objects for a long time.
5. The floor after paving should minimize the direct sunlight of the sun and prevent the strong and long-lasting sun exposure to the floor, so as to prevent the paint from aging and cracking in advance under ultraviolet irradiation. If you accidentally pour water or leave water on the ground, you must wipe it clean with a dry soft cloth. After wiping clean, do not directly expose the sun to the sun or bake it in an electric oven to avoid drying too fast. The floor is cracked.
6, daily use should pay attention to avoid heavy metal sharps, glass tiles, studs and other hard objects scratch the floor; furniture can be glued on the bottom of a layer of rubber or special corner pads, moving furniture should not be directly pushed on the floor Should be lifted and gently moved, do not drag on the surface of the floor; do not let the floor touch the open flame or place a high-power electric heater directly on the floor; it is forbidden to place strong acid and strong alkaline substances on the floor;
7. During the use of the floor, if individual floors are found to be shelled or peeled off, the floor should be taken in time, the old glue and ash should be removed, and new glue should be applied to compact. In order to maintain the beauty of the solid wood floor and prolong the service life of the paint surface, it is recommended to use the special oil for nature every year to be maintained by professionals or under the guidance of professionals. It should be maintained every two or three months or according to the daily use frequency;
8. If large-area flooding occurs inadvertently or if it is partially soaked in water for a long time, if there is water retention, it should be dried with a dry cloth in time, and the floor should be taken out and placed in a cool and ventilated place to dry. It is strictly forbidden to use electric heater to dry or Exposure in the sun, after the floor is dried, use the floor water detector to check the moisture content of the floor, the keel or deck, the moisture content of the floor, and then install it at the local equilibrium moisture content.
9, once every other time to play a wax, the time interval depends on the finish of the floor paint finish. The method is to first clean the floor and wax with a semi-dry rag. Apply evenly to the floor surface and "soak", wait a little dry and then wipe back and forth on the floor with a soft cloth until it is smooth and translucent.
10. The cleaning method for special stains is: oil stains, paints and inks can be wiped with special stains: if it is blood stains, juice, red wine, beer and other residual stains, wipe it with a damp cloth or a cloth with a proper amount of cleaning agent; Do not use a strong acid-base liquid to clean the floor.
More furniture tips are all in Suzhou home network!
Electrical Switchgear Protection
Definition of Switchgear
A switchgear or electrical switchgear is a generic term which includes all the switching devices associated with mainly power system protection. It also includes all devices associated with control, metering and regulating of electrical power system. Assembly of such devices in a logical manner forms switchgear. In other words apparatus used for switching, controlling and protecting the electrical circuits and equipment is known as switchgear. This is very basic definition of switchgear.
Electrical Switchgear
Electrical Switchgear,Medium Voltage Switchgear,Low Voltage Switchgear,High Voltage Switchgear
Yangzhong Huaxin Power Equipment Co.,Ltd , http://www.huaxinbusbarchina.com