Analysis on the variety and damage of the insister

Source: China Bearing Network Time: 2014-07-06

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Xiajin County Dongxu Persistence Factory is a company specializing in the development and production of bearing adherents. It was established in 2008; there are nearly 50 workers and 5 engineers. The products are the second-class bearing series products; more than 50 varieties Widely used in agricultural machinery, electromechanical, gearbox, machine tools and other mechanical categories; the following analysis of the variety of the adherent and the reasons for damage.
Classification <br> The steel plate crown bearing holder is drawn according to the inner ring; the stainless steel plate is formed at one time.
Nylon crown bearing holder is drawn according to the inner ring; made of polyamide (nylon 66).
Steel plate rivet wave bearing adheres to the two parts of the wave shape fixed by rivets; bearings for high load work.
Damage causes <br> The damage of the bearing holder is not obvious; under normal circumstances, it is not easy to distinguish. The bearing sensation; speed exceeds the drawing requirements; wear; foreign matter jam and tilt are the main reasons for the damage of the holder. Anatomy of the situation described above:
1. A sensation when the bearing is in a sensation; the internal force of the bearing can cause the wearer to exhibit fatigue cracks. Gradually; this crack will break the holder. To avoid this appearance; bearings with special adherents can be used.
2, the speed exceeds the depiction demand if the bearing works at a speed beyond the persistence of the data; inertial force will lead to the break of the holder. There are high-speed bearings specially made for this occasion.
3. A smooth or sturdy foreign object that is not worn properly will cause the bearing to wear. The rolling bearing is most likely to have sliding friction when working. However, the sliding contact between the roller and the holder is usually impossible to eliminate; The stick is the worn part of the first battle. And the stick is made of softer material; so the wear is just as fast. The gradual adherence of the gap will cause the stick to break quickly. When the sturdy particles wear When entering the bearing; there will be the same situation.
4, the foreign matter stuck parts of the fragmentation or particles can be stuck between the holder and the roller. Prevent the rollover from rolling. This will also cause the crusher to break. As long as it can avoid large foreign objects invading the bearing; even in heavy load occasions The adherence can also be safe and sound.
Xiajin County Dongxu Persistence Factory Contact: Zhang Yuandong. ã„å£¬ Mobile phone: 0534 - 3268799
Fax: 0534 - 3268799
Address: 0? è” è” å±±ä¸œ å±±ä¸œ å±±ä¸œ?
Website: http://dxbcq. Shop. Ttzcw. Com/

Recommend to friends comments close window

Bearing related knowledge

The protection method of the pump bearing analysis analyzes the harm of the koyo bearing hazard and extends the life of the bearing.
SKF single row tapered roller bearing minimum load selection tips for bearing clearance

This article links to http://
Please indicate the bearing network http://

Previous: NTN Bearing Application Skills Repairing Method Next: Analysis of Improvement of Preload of Thrust Spherical Roller Bearings

Water Reducer mainly is used for cement in construction field. Used for and widely for self-cured, vapor-cured concrete and its formulations. At the early stageof application, extremely prominent effects are shown. As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak-heatsummer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed.The new raw material is researched and produced by ourselves, which is mainly used in theproduction of polycarboxylate superplasticizer products.

Remarkable plasticity: as a condition of blending where amount of cement and collapsibility are fixed aforehand, mixing water can be decreased by 18-28% when it is admised with reinforced concrete at 0.5-1.0%. Ststistically, compression strendth on the 1st day, the 3rd day and the 28th day after single application is increased by 60-90% and 25-60% respectively when it is added at standard blend dosage. As the result, compression strength, tensile strength, bucking strgth and modulus of elasticity will be improved to some extent.

*Related Products:water clarifer,water reducers for concrete.

Water Reducer

Water Reducer,Sodium Polynaphthalene Sulfonate,Sodium Naphthalene Sulfonate,Concrete Water Reducer

SJZ Chenghui chemical co ltd , https://www.chenghuichemicals.com