How to assemble the high pressure flange of the pipe?
1 First check if the high pressure pipe end thread is completed. There are burrs and threaded barbs to be repaired with triangular plaques. Check the thread inside the flange for any debris and clean it up.
2 Apply molybdenum disulfide or grease to the threads. After the flange is screwed on, the F-wrench made of round steel or rebar can be used to rotate the flange.
3 When the flange is placed on the pipe, sometimes the screw is tight, the hand does not move the flange, and the F wrench is also very difficult. This can be used to hit the flange plane and side with a sledgehammer. If the tapping still does not move, it must be unscrewed, and the internal and external threads are too tight to be processed.
4 When the threaded flange is screwed into the pipe end, the pipe end thread should be chamfered to expose the flange plane.
5 After the flange on the pipe is assembled, the pipe mouth should be sealed with plastic cloth or broken wood to prevent the sealing surface of the pipe from being damaged.
Article source: http://
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Geosynthetic Clay Liner( GCL)is made from 100% natural sodium bentonite, Woven Geotextile, nonwoven Geotextile.Geosynthetic clay liners (GCLs) are high performance needle punched environmental reinforced composites which combine two durable geotextile outer layers with a uniform core of natural sodium bentonite clay to form a hydraulic barrier. Fibers from the non-woven geotextile are needle punched through the layer of bentonite and incorporated into the other geotextile (either a woven or non-woven).when hydrated under a confining load, the bentonite swells to form a low permeability clay layer with the equivalent hydraulic protection of several feet of compacted clay.
Property
1. Swell when meet water
2. Long time waterproofing and friendly to environment
3. Separation, reinforcement, protection, filtration and easy for construction
Application
1. Municipal project, subway, underground and roof waterproofing
2. landfill, waste water treatment, industial waste
3. Waterproofing and reinforcement in water conservancy, river, lake and dam
4. Artificial lake, golf course and fish pond
5. Petrifaction and mineral waterproofing
Specification
Unit weight: 4500g/m2, 4800g/m2, 5000g/m2, 5500g/m2, 6000g/m2 or customerized
Width: 5m-6m or customerized
Length: 10m, 20m, 30m, 40m, or customerized
Technical data
Geosynthetic Clay Liner With Geomembrane
Geosynthetic Clay Liner With Geomembrane,Natural Bentonite Geosynthetic Clay Liner,Geosynthetic Geomembrane Clay Liners,Geomembrane Geosynthetic Clay Liner
Shandong Tianhai New Materials Engineering Co., Ltd , https://www.chinatinhy.com