Step 1: Check the Water Absorption
The first thing you should do is test the water absorption of the tiles. This test gives you an idea of the tile’s density and hardness, but it's important to note that lower water absorption doesn’t always mean better quality. This test is especially useful for tiles used in high-traffic areas like the living room, bedroom, or hallway. Imagine if water seeped into the tiles—wouldn't that make the whole area wet and unsightly? To perform this test, pour a small amount of water on both sides of the tile and observe how quickly it is absorbed. If the water is absorbed very quickly, especially with polished tiles, that might be a sign of poor quality. Be cautious and double-check before making a purchase.Step 2: Inspect Surface Flatness
Many buyers ask about flatness when purchasing ceramic tiles, as uneven tiles can lead to problems during installation. Some customers end up replacing entire batches because they didn’t check the flatness beforehand. The issue could come from either the tile itself or the installer. Before laying the tiles, take the time to check their flatness. Place a few tiles on a flat surface and see if they sit evenly. If they don’t, it may cause uneven results after installation. It’s best to confirm the quality before calling the contractor to avoid future issues and misunderstandings.Step 3: Test Corner Straightness
Another important step is checking the straightness of the tile corners. This helps ensure that the tiles will fit together neatly and create a consistent gap pattern. To do this, place a few tiles side by side on a flat surface and look at the edges. They should align smoothly without any noticeable gaps or irregularities. If the corners are not straight, the final layout may look messy and unprofessional. This step is crucial for achieving a clean, polished finish.Step 4: Test Stain Resistance
Tiles are meant to last for years, so it’s essential to check how well they resist stains. A simple way to test this is to write a word like “Go here†on the tile surface using a marker or ink. Let it sit for a while, then try to wipe it off. If the mark stays or is hard to remove, the tile may not be ideal for your home. Stain resistance is a key factor in maintaining a clean and attractive space over time.Step 5: Scratch Test for Durability
To check the wear resistance of the tile, use a knife or similar tool to gently scratch the surface. If the glaze comes off easily, the tile may not be durable enough for high-traffic areas. Modern tiles have improved significantly in terms of durability, but it’s still important to verify this manually. A tile that scratches easily won’t hold up well over time, so choose wisely to ensure long-term satisfaction.Small Fountain,Pool Water Fountain,Water Dance Light,Portable Musical Fountain
Guangzhou Dewy water fountain Technology Co., LTD , https://www.dewyfountain.com