(2) Floor Springs: The floor springs of the doors should be stainless steel or copper. Before being put into use, they should be adjusted before and after the speed of opening and closing to facilitate use. Hydraulic parts must not leak oil. Can also use the door.
(3) Door lock: It should be a double-sided safety lock.
(4) push hands: use stainless steel, aluminum alloy or copper.
(5) Pulleys and pulley frames: Hard nylon wheels, pulley frames, and galvanized steel products are optional.
(6) Sealing material: sealing rubber strip should be used in combination with waterproof sealant
Low Temperature Welding Vacuum Glass
The key of vacuum glass is the glass welding technology. Therefore, the low temperature welding of Safety Vacuum Glass has always been the research focus at home and abroad, and it is the inevitable requirement of the development of building glass industry. The vacuum glass from ICESUN adopts low-temperature welding technology and professional welding equipment. We not only master the core technology and break the gap in this field in China, but also greatly reduce the cost through the cooperation of the industrial chain and lay the foundation for industrialization. ICESUN tempered vacuum glass is separated by a 0.2mm high support, and the edges of the two layers of glass plates are sealed with low-temperature glass, and then the air is discharged. If any need for Vacuum Glass For Passive House, Vacuum Glass For Sun Room , Vacuum Glass For Greenhouse, Vacuum Glass For Cars or other Environmental Vacuum Glass products, please contact ICESUN Vacuum Glass LTD. at any time you need.
Low Temperature Welding Vacuum Glass,Low Temperature Welding Glass,Patented Low Temperature Welding Glass,Low-Temperature Welding Sealed Vacuum Glass
ICESUN VACUUM GLASS LTD. , https://www.icesunvacuumglass.com