The amount of floor can only be estimated before the renovation, so after the renovation is completed, there will often be some surplus. Most families treat these remaining floors as scrap or recycling. However, in fact, these scraps can be fully utilized. After simple processing, they can become very useful items. If you are interested in reusing the remaining floorboards, you can read this article carefully, using your ideas to make reasonable use of the remaining floorboards, and DIY yourself is also a very interesting thing.
| Transfiguration One: Balcony Flower Stand |
The simplest way to use the remaining floor is to build them into a flower stand, especially some families have large balcony space. A stainless steel bracket can be installed on the walls on both sides of the balcony, and the corners of the floor can be neatly laid out. The "flower garden" was born. Planting some green plants such as spider plants and vines not only can decorate the balcony space, but also can arrange the balcony into an elegant leisure area.
After the flower stand is erected, if there is still the remaining floor “scrapâ€, a row of floor trim can also be placed against the wall under the flower garden and fixed with viscose to hold small green plants or potted plants such as cactus and monstera. plant.
In addition to the flower stand that can be transformed into a balcony, if the width of the floor scrap can reach 10 cm or more, the combination of "stainless steel bracket + floor scrap" can appear on the blank wall of the kitchen, and it becomes a simple and powerful storage function. The cabinet is used to store condiments, dishes and other supplies. The same method can also be "replicated" into the bedroom and built into a simple bookcase.
| Transfiguration II: Desk Clips |
Books and documents on the desk often need to be fixed with a book holder. Good quality floors are often hard textures and beautiful patterns. It is appropriate to use such a “scrap†floor to make book holders.
The production of the book holder is not complicated. Only two floors of the same size are required. Then a slot is formed on the floor with the appropriate width, and the other floor is then partially glued and glued together to form an “x†shape. The edge of the floor was leveled with a saw, and finally a thin iron sheet was bound at the bottom of the floor. A simple book clip was formed.
If the color of the floor is light, you can also paint the book clips according to your preferences, or paint cute patterns on your hands, and don't smell it in your room.
| Transfiguration III: Showcase for living room |
It is also a good idea to make the remaining material of the floor into a small display cabinet. However, the production method of the display cabinet is a little more complex and requires stronger hands-on ability and more time.
As shown in the figure, the thickness of the bottom plate of the display case is wider than the side plate, so it is more beautiful, but if the floor can not be evenly cut into two pieces to make the floor thinner for the side plate of the display cabinet, the floor can also be preserved. The original thickness, the height of each side panel should be about 10 centimeters difference, so that display cabinets show a high and low patchy feeling.
The most troublesome thing in production is the floor of the display cabinet. In order to fix the side plates, the bottom plate needs to be grooved, and then the side plates are embedded in the bottom plate. The top plate is relatively simple to manufacture and can be directly fixed on the side plates with a nail. The finished display cabinet is placed in the corner of the living room. It is fun to put small vases and small ornaments on it.
| Transfiguration IV: Corner Storage Cabinet |
The storage cabinets are always better in the living room, and the use of corners as storage areas is becoming more and more popular. In particular, the balcony connecting the kitchen should share the pressure on the kitchen.
After the decoration, the “grand material†in the remaining floor is simply splice, and a storage rack can be made to store large pots, barrels of oil, bags of rice, etc. The finished storage cabinet has good performance.
Summary: After reading this article, everyone has a better approach to decorate the rest of the floor. If you want to create something, use your own methods to use the remaining floor is also possible, and the practical floor as a material to make decorations is also very good. However, the demand for aesthetic demands is higher. On the other hand, using the remaining floor to make other items depends on the number of remaining floors. We must remember that we must be able to make enough of it.
Money Saving Decoration Flooring Installation Flooring Space Stainless Steel Home Decorating Living Room Wall Color Decoration Living Room Kitchen Cabinet Simple Bookshelf Vase
With a modern factory size over 60,000 m2,
and qualified industrial engineers, Zhongda is able to manufacture complex and
large steel industrial components, such as sintering machine, tunnel boring
machine, etc. The factory has single component lifting ability of 100 tone, and
combined with the functions of assembling, welding, testing, painting etc. All
pressure components are 100% X-ray texted quality control is carried out
through all procedures.
Large Steel Components,Large Industrial Components,Customize Steel Component,Large Steel Components Parts
Zhongda Steel Structure , http://www.zhongdametal.com