Saying home decoration, drift is not beautiful, it is design; quality is good, it is construction. So finding a good home improvement company, the picture is peace of mind. However, you must pay attention to the pretending friends, in fact, before contacting the home improvement company, there is a link that is very important! That is the home inspection! In the pre-decoration period, the nine major attentions that need to be paid attention to when checking homes are as follows:
  American Master Coatings (Western Chemicals)  Â
First, the wall inspection
1. Check whether there is cracking on the wall; 2. Check whether there is empty drum on the wall surface, knock on the wall with a small wooden hammer or something, and the sound produced when knocking on the empty drum is not true, it is easy to hear it. Marking, filling with putty during the renovation; 3, check the wall putty, whether it is waterproof putty, you can bring a bottle of mineral water, splash water on the wall, hand touch, see if there is mud, if not prove Waterproof putty on the wall is qualified.
Second, the roof inspection
1. Check whether there is cracking on the roof; 2. Check whether the yin and yang angle lines on the roof and the wall are horizontal lines. If not, use a stucco plaster to lower the water level in the future decoration and then use a waterproof putty to level it.
Third, the ground inspection
1. Check whether the ground is flat; 2. Check if there is cracking and backsuding: If there is sand on the ground when the ground is used for the ground. This problem occurs when mortar ratio or cement quality is unqualified and the mixing is uneven.
After the big face is checked, the details are checked. The construction unit of each house is different, and the quality and design are also different. The professionalism of supervision plays a very obvious role in these aspects. The details are very important. Many places are invisible to us, or there may be problems with the decoration of furniture in the later period.
Fourth, door and window inspection
1, check the strength of doors and windows
2. The function of the inspection window (1). The sliding of the door and window is smooth, the surface is smooth and smooth, there is no serious scratch, and the profile has no crack or fracture.
(2) Hardware Accessories: complete, correct and firm.
(3). Sealing quality: When the doors and windows are closed, the fan and the frame have no obvious gap between the fan and the fan. The sealing strip is not loose, does not come off, and is not exposed.
(4). Door and window frame, fan vertical, not bent.
(5). The glass is non-polluting and has no damage. The double glass sandwich has no dust and moisture, and the dividing strip is even.
(6) Whether the window drain hole has been opened. Unopened water will flow into the profile.
Entrance decoration Children's room decoration Window plug cement switch Home improvement glass furniture Glass door Toilet door Kitchen glass Sliding door Bathroom door Bathroom wash basin Overall bathroom Toilet design Bathroom waterproof Bathroom leaking
KelaiWood , https://www.kelaiwoodens.com