[China Aluminum Network] We must first understand that straightening this process is a frequent occurrence of the aluminum profile. As a staff member who is straightened out, he must pay attention to the strength of his hands when he is straightened. If the strength is too large, the profile may be deformed, closed, orange peel, etc.; conversely, if the strength is too small, the profile that will constitute the attack will not be straightened, which will result in a bend. 2024 aluminum alloy alloy aluminum rod
Next is the aluminum profile kneading frame, which is also very important. After sawing out the length of the cut, it is usually necessary to frame it. When setting up the frame, the staff who are working on this process must pay attention to the size of the material, and the material that the tube is still pulled out of the plane mold. In addition, if the surface of the aluminum profile is time-dependent, and hardness is detected, then the profile is not so easily bent. However, it is still necessary to pay attention to the shelf. When the two ends are lifted, the aluminum profile should be as stable as possible, avoiding large inconsistencies. Severe rises in aluminum profiles can also result in positive bending of already aged profiles.