Do not let the heat-conducting oil into a machine ***

Under high-temperature heat-baking, the fire safety situation of printing and dyeing enterprises in Shaoxing County has increased severely, and fire safety has become more frequent. Among them, the setting machine using heat-conducting oil has become a focal point of fire insurance. “Most of the county's printing and dyeing enterprises established large or small fire accidents.” At the fire-fighting work conference held in the county's printing and dyeing industry held on August 13, the county fire brigade captain Gong Cheng proposed that the stereotyped machine be fire-fighting. Safety is worrying and it has become a major hidden danger in production safety.

The stereotyped machine has become a source of potential fire hazards for printing and dyeing companies. The stereotypes of the printing and dyeing companies are required to operate under high-temperature heating. Therefore, it is very easy to cause fires and it is difficult to prevent them. Recently, in the new printing and dyeing company in the Binhai Industrial Zone, its stereotyped workshop has experienced a thrilling scene: the setting machine caught fire and the steel pipes burned darkly. “The new stereotyped machine suddenly suffered a fire. Fortunately, staff members at that time extinguished the fire in a timely manner and did not cause major losses.” Recalling the fire at the time, Chen Jianye, general manager of Xinfa Printing and Dyeing, was still afraid.

"The most afraid of midnight phone calls sound." Zhang Guohua, chairman of Shumei Knitting and Printing Co., Ltd., said that late in the night is a dangerous time for workshop staff to guard against relaxation and easy negligence, and it is also a high-incidence period for fire accidents. "In the event of a fire, not only economic losses, but also the fear of casualties, a fire can make a lifetime's business go to an end, fire safety can not be relaxed." Zhang Guohua said.

Shaoxing County has more than 200 printing and dyeing companies, and more than 1,900 sets of these machines have become the main source of fire in the company. The reporter learned that, in 2012, there were 158 fires in the setting machine of the county, and 84 fires have occurred this year.

What should I do if steam fire extinguishment gets the fire department to face the ever-increasing number of fire accidents? Shaoxing County, a large number of printing and dyeing enterprises to actively guard against stereotypes and other fire accidents.

Daily check the stereotyper filter screen is blocked, the hidden dangers as soon as possible to eliminate - this is the practice of red, green and blue printing. "In the setting machine heating process, the wool floccules are flammable after plugging the filter screen, which is the fuse that causes fire." The company's deputy general Jiang Xuye said that cleaning the filter screen can greatly reduce the risk of fire.

However, it is very difficult for stereotypes fires to be completely prevented. What happens when there is a fire risk? Jiaye Printing and Dyeing Innovation adopts steam fire extinguishing method, which is very effective. “In the setting machine, access steam, once the stereotype machine chassis meets a fire alarm, just close the chassis and immediately open the steam valve, you will be able to extinguish the Mars inside the chassis in four to five minutes.” The company responsible person introduced their workshop All setting machines use steam fire.

“The setting machine has a high temperature and a large range. Once a fire is difficult to control, fire extinguishing with dry powder, water, etc. cannot be well resolved, but steam fire extinguishing does have a very good effect.” The practice of Jiaye Printing and Dyeing has been recognized by the fire department. Lu Weimin, chief of staff of the Fire Brigade, believes that using the steam connected to the setting machine interface to extinguish fire can quickly eliminate the air from the setting machine, isolate the fire and burn the environment. The response is quick and the effect is good. It is worth learning from the printing and dyeing companies.

Tightening fire safety at all times The staff of the county’s fire department found that the main fire safety problems in the printing and dyeing industry in Shaoxing County were: Occupation of fire separation distances and changes in fire zoning were prominent. Due to the impact of the land area, most enterprises have illegal structures, occupying evacuation passages, blocking safety exits, and some companies and even the entire plant area are joined together without fire separation or fire separation. Once a fire accident occurs, It is easy to "fire together"; some companies still have a "three in one" phenomenon, the production area, living area and staff quarters are located in the same building, personnel are mixed, the use of fire is not strict, there are many factors that induce fire; The phenomena of fire protection facilities and equipment damage are prominent. Most enterprises do not understand the maintenance of fire protection facilities and equipment. The phenomenon of random damage, occupation, and occlusion is very prominent. In the event of an accident, the fire protection facilities cannot play their due role; the fire safety awareness of the enterprise staff Low, many employees of enterprises do not understand the use of fire-fighting facilities and equipment, and do not understand fire fighting. In the event of a fire accident, they panic and inflict delays, resulting in increased fire damage.

In response to these existing problems, deputy magistrate Hu Guowei emphasized at the symposium that all printing and dyeing enterprises should raise awareness and effectively tackle the rectification of fire hazards. In particular, in the face of fire-setting stereotype machines, we must always knock a safety alarm and do not let the stereotyped machine become the “***” that causes fire in printing and dyeing enterprises.