The work of the woodworker was beautifully done. He looked at the door and made a picture of the effect. He immediately encountered a problem: How could this lock be installed? Quickly go online to find the answer. Entering the "Invisible Door Lock" on the Internet, we found that the entire page was a question raised by everyone, but there was very little satisfactory answer to this question. So he hunted down his head to search for thoughts and finally heeded his thoughts. Here, he told everyone how to hide the invisible door.
First introduce the invisible door. The practice of invisible doors is roughly divided into two types. One is to make a sliding door, and the storage room is often used to hide corridors, bathrooms, etc. The use of sliding doors may not require locking, so the problem with door locks is not great. The other type is the opening and closing door, which is often made to match the wall surface, or is affixed with the same wallpaper as the surrounding wall surface. Here's what the common stealth door I've collected looks like.
User invisible door case
Invisible door closer
Opening and closing type invisible door lock how to install?
I summarized the following four ways:
1. The side to reach the invisible effect has nothing at all, and the hidden effect is best. If you want to achieve such an effect, that is to say, the door must be pushed inward. If you push directly with your hand, then you have to consider how to close the door from the room when you push it into the room. There are two methods that can be used: first, install a door closer on the back of the door (as shown). The function of the closer is to release the hand when you push it in. The closer will close the door slowly. . You don't need to pull it up. In other words, this door has always been closed. However, some TX homes would want the doors to be open and ventilated. At this time, it is necessary to buy a positioning type closing device. When the door is pushed to 90 degrees or more, it can be automatically positioned and kept open. And it is best to install a door stopper, and it is said that it is better for closure, too. More effort it. In this way, the situation when the door is pushed from outside to inside is solved. From the inside to the open door, it is necessary to install a handle on the invisible side. There are special door handles. Note that unlike ordinary cabinet handles, the cabinet handles are to be cut through the door, fixed inside, and there is no way to keep our doors facing outwards, so when you choose pay attention. However, if the bedroom is a typical door, it is necessary to take into account a privacy problem. If you do not install a lock, you cannot lock it. Therefore, remember to install a concealed latch inside. Of course, it's okay for you to install the plug. It's not good to see. The mortise bolt is similar to the insurance of the general lock. When you turn, the door closes. It can't be opened outside. It may cause children or the elderly to accidentally lock themselves in. In general, the problem is not great. In the store outside the general call this hidden plug called "invisible lock."
To sum up, to make a door that looks completely invisible on the outside, you can install a mortise bolt on the back, a door closer, a handle (if you feel that you can use the mortise bolt as a handle to open the door, you can not buy the handle) and a Door stopper (this can also be omitted). This has the advantage that no lock can be seen from outside the door, but the door cannot be locked outside, only the inside can lock the door. It is more suitable for hiding the hidden door in the bedroom. A good closer may cost a little more, but hardware is a point-and-price item. I haven't compared myself. I don't publish it. Go to the physical store to see that there is a door hinge with a closed door. However, the price is seven or eight hundred and it is not willing to go. If you buy this hinge with a closed function, you don't need a closer and it's more beautiful.
Install a ball
2, hidden door front mounted a handle. It can be very small. Not so obvious. In this case, there is no problem if the door is pushed in and out from the outside, and it is not necessary to install the closing device. Like the back of the door, it can be fitted with latches and it can be fitted with door stoppers. However, the problem is that after the door is closed, it may not be fixed. It's possible that the wind blows the door open with a gust of wind, and naturally it doesn't reach the invisible effect. This time can consider buying a ball, installed in the door lock position, can achieve the effect of closing.
Ball
3, Invisible door lock. Or lock it as usual. In this case, the invisible effect may not be obvious. There are several options for this lock. One is the most common lock, one is the so-called stealth lock.
There is also a single-sided lock, also called a head lock. The recessive side has only one round hole, and the other side is a door-like switch that is similar to a concealed pin.
The above is my summary. I believe most people still want to install the hidden door front not to have anything, so better concealment. That is the first way I talked about in detail. I hope to have some help for everyone.
Corridor Space Effect Picture Door Price Room Bedroom Effect Picture Door Effect Picture Bathroom Effect Picture Cabinet Door Cabinet Cupboard Door Bathroom Invisible Door Bathroom Door Bathroom Sliding Door Small Bedroom
Roofing Curving/Crimping machine
Cold Roll Forming Machine,Hydraulic Curving Machine,Cnc Roofing Curving Machine,Roofing Crimping Machine
Wuxi Xinshijie Roll Forming Machinery Co., Ltd. , http://www.cn-rollformingmachine.com