>>> Problems needing attention in tile construction
The main reasons for the hollowing of tiles are: when the tile is plastered, the mortar is not full or the tiles are not tapped and compacted; the tiles are not immersed in water or soaked before the tiles are plastered; the base plaster is not treated as required or the ground layer is not rubbish Clean up and so on.
Tiles apply water soaking for more than 2 hours before paving, allow the tiles to fully absorb water, remove the shade or wipe clean water; check the plastering of the wall base for compliance with the requirements, wall base, dirt, dust must be removed; paving will be Fill the back of the tile with a mixture of cement mortar or 107 grout and use a spatula's wood to tap the tile so that the grout will fill the back of the tile and press firmly to firmly bond the tile to the wall base.
Special attention should be paid to the fact that when the back of the tile is full of mortar, the edges of the tiles should be beveled with a little space in the middle, so that when pressing and tapping the tile, neither will cause mortar overflow everywhere. It can also make the mortar full, and the ceramic tile is firmly bonded to the wall.
After the tiles have been plastered and the mortar has been solidified, tap the tile surface with a small hammer to check if the tiles are empty.
Tile paving construction acceptance ceramic tile cement
In organic chemistry, amines are compounds and functional groups that contain a basic nitrogen atom with a lone pair. Amines are formally derivatives of ammonia, wherein one or more hydrogen atoms have been replaced by a substituent such as an alkylor aryl group (these may respectively be called alkylamines and arylamines; amines in which both types of substituent are attached to one nitrogen atom may be called alkylarylamines).
Chemicals Amines,Dodecyl Amine,Dicyclohexyl Amine,Ethanol Amine
Shijiazhuang Xinlongwei Chemical Co., Ltd. , http://www.xinlongwei-chem.com