In order to meet the needs of customers, Quaker made a series of analysis on the status quo of customers. It was found that white residue and foaming were mainly caused by the following reasons:
1. Water quality is the main factor affecting white residue. If the equipment operator does not open the water purification device when adding water, the residual amount will increase significantly.
2. The original cleaning agent will have a large amount of foam under the ultra-high pressure. It will be dissolved into the working fluid after the oil is cleaned, which is difficult to be removed by the oil slinging device. As the oil in the working fluid accumulates, the residue will gradually increase. To solve the current problem, Quaker used the QUAKERclean ® 624 CP cleaning. Since the cleaning agent can clean the surface of the working fluid after cleaning, the oil can be effectively removed by the oil slinging device, which can effectively reduce the accumulation of oil in the working fluid, thereby prolonging the working time of the working fluid. In addition, the QUAKERclean ® 624 CP itself has less residue and foam, and has a long service life and is more suitable for the cleaning of aluminum alloys.
The original cleaning agent white residue and foam increased significantly
QUAKERCLEAN ® 624 CP white residue and foam improvement
detergent
QUAKERclean ® 624 CP
In order to ensure that customers can get better cleaning results, Quaker not only provides a better solution on the product, but also provides a series of guidance on the daily operation according to the on-site analysis:
1. When dispensing and adding, be sure to turn on the power of the water purification device to make it work normally, and add the purification reagent at regular intervals. To ensure that the water used in the tank is effectively purified.
2. When cleaning the oil pool shell, the sewage washed on the workpiece is likely to remain on the upper and lower surfaces, especially near the side of the fixture. Therefore, it is recommended that the customer add a flushing procedure on both front and back surfaces instead of rinsing (30 seconds required) after the cleaning procedure is completed, which can effectively reduce the occurrence of visible residue.
3. Change the cleaning agent regularly. Through the preliminary trial, it can be clearly found that as the number of cleaning workpieces increases, the residual surface of the workpiece will gradually increase. Therefore, it is necessary to develop an effective liquid exchange period according to the number of cleaning workpieces.
product information
QUAKERCLEAN ® 624 CP is a mild, mild detergent that is widely used in automotive industry parts cleaning. This product has excellent cleaning properties and low foaming properties. It can be used for high pressure spray cleaning of ferrous metals (steel and cast iron) and non-ferrous metals (aluminum alloy), and can also be used as a waterborne rust inhibitor alone.
Process and equipment information
Product and process knowledge
Metalworking fluids account for only a small fraction of the total cost of the metalworking process, typically less than 1%. This application case is a good illustration of the importance of the correct choice of metalworking fluids. The effect of metalworking fluids on the entire production process is several times its own cost, which makes its price less important. That's why Quaker develops high-performance products at no cost to help customers reduce production costs and increase competitiveness.
Tyoe: Colour Finish Basins,Finish Basins,Colour Wash Basin,Colour Finish Basins For Sale,Ceramic Sink For Bathroom
Colour: Matte Black / other colour
32mm Waste Without Overflow / 32mm Waste With Overflow
Material: Porcelain
Supply Ability: 15000 Piece/Pieces Per Month
Place of Origin: Chaozhou, China
Customization: Customized Logo(Min. Order: 30 Pieces)
Customized Packaging(Min. Order: 30 Pieces)
FOB: Shenzhen
Shipping: Support Express · Sea freight · Land freight · Air freight
After-sale Service: Online Technical Support,
Project Solution Capability: Graphic Design, Total Solution For Projects
Colour Finish Basins,Finish Basins,Colour Wash Basin,Colour Finish Basins For Sale,Ceramic Sink For Bathroom
Duraplex Limited , https://www.fsduraplex.com