[Asia Pump Network News] to do a good job on the SZ-type water ring vacuum pump routine maintenance and repair work to improve pump efficiency, but also to ensure the life of the pump. Now to talk about SZ-type water ring pump maintenance and repair methods. Water ring vacuum pump SZ water ring vacuum pump maintenance and repair methods 1. Before assembly cleaning should be left in the binding surface and carefully dry coated with oil. All mating surfaces and threads should be carefully wiped clean action on the oil. Remove old oil from bearings and bearing racks and add new oil. 2. Always check the ball bearings work and lubrication conditions. 3. The normal work of rolling bearings, the temperature higher than the surrounding temperature 15 ℃ ~ 20 ℃, the maximum allowed not to exceed 55 ℃ ~ 60 ℃, the normal work of the bearing should be installed 3 to 4 times a year. Clean the bearings at least once a year and replace all the lubricants. 4. Should be regularly compressed packing, such as packing due to wear and tear can not guarantee the required sealing, should be replaced by a new packing, packing can not be over-pressed, normally compacted packing allows water droplets drip, the amount of not too More, the application of oil asbestos ropes as filler. Further Reading: pump valve pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro letter:) http://beng.liuti.cn/ (Hotline :)
Glass Sectional Garage Door,Organic Glass Sectional Door,Tempered Glass Sectional Door,Glass Sectional Overhead Doors
Dongguan HengTaichang Doors Co, Ltd. , https://www.dghtcdoors.com