Shot blasting machine track is a very professional special rubber belt, various technical indicators are different from ordinary rubber belts, and the required rubber-containing rate is as high as 60% or more. Therefore, it is not controlled by ordinary rubber belt factories in the society, and the quality is uneven. The average consumer Need to learn how to identify the advantages and disadvantages of the track, the following is the Xin Huang Hai company to do some simple analysis of the quality of the shot blasting machine rubber track:
A look at the second touch, to see the gum, shot blasting machine rubber track consists of three parts, the outer is covered with plastic, directly contact with the workpiece being cleaned, receive steel shots, so wear and tear, withstand a lot of damage Force and impact, the life of the rubber covering is almost the lifespan of the crawler. The glue is also exposed to the outermost rubber. The quality is good and bad can be seen and touched. The rubber is flexible and the rubber is made by the mold. In order to let the gas in the mold cavity be discharged, the mold has fine holes in the exhaust, leaving a vent line on the rubber, and the exhaust line can be pulled by hand to feel elasticity, and the rubber is good. As for the spots on the surface of the crawler, it is the rubber dirt that has been stuck on the mold for a long time and does not affect the quality.
A look at the second touch, to see the gum, shot blasting machine rubber track consists of three parts, the outer is covered with plastic, directly contact with the workpiece being cleaned, receive steel shots, so wear and tear, withstand a lot of damage Force and impact, the life of the rubber covering is almost the lifespan of the crawler. The glue is also exposed to the outermost rubber. The quality is good and bad can be seen and touched. The rubber is flexible and the rubber is made by the mold. In order to let the gas in the mold cavity be discharged, the mold has fine holes in the exhaust, leaving a vent line on the rubber, and the exhaust line can be pulled by hand to feel elasticity, and the rubber is good. As for the spots on the surface of the crawler, it is the rubber dirt that has been stuck on the mold for a long time and does not affect the quality.
Downlights do not occupy space, which can increase the soft atmosphere of the space. If you want to create a warm feeling, you can try to install multiple downlights to reduce the pressure of the space. It is generally used in hotels, families and coffee shops.
Recessed Downlight,Surface Downlight,Adjustable Downlight,Panel Light
JINGYING , https://www.jingyinglight.com