1. Black areas: scrape off the marks, rub off the nodules, dry and repaint.
2. Paint drips and overflows: After the paint is dry, it is sanded, dusted and repainted.
3. Wrinkles: When the first layer of paint is applied, the second layer will produce wrinkles. It should be scraped and repainted.
4. Gravel: If the gravel is wrapped in dry paint, lightly grind it with sandpaper, sweep paint, wipe it dry and wipe it clean.
5. Starting up: Remove the original paint (if there is a gap, fill it first), make a base, paint the primer and then paint.
6, uneven coating: If you see the primer see, you can add a layer of paint.
7, flakes off: the surface is not treated well, should scrape off the original paint, look good on the surface, repaint.
8. Spots: Apply paint on the surface of aluminum and repaint it.
9, crack: If the two layers of paint are incompatible, it will produce cracks, scrape off the original paint recoating.
10, black spots: sanding and re-coating when dry, wipe the black spots and modified.
2. Paint drips and overflows: After the paint is dry, it is sanded, dusted and repainted.
3. Wrinkles: When the first layer of paint is applied, the second layer will produce wrinkles. It should be scraped and repainted.
4. Gravel: If the gravel is wrapped in dry paint, lightly grind it with sandpaper, sweep paint, wipe it dry and wipe it clean.
5. Starting up: Remove the original paint (if there is a gap, fill it first), make a base, paint the primer and then paint.
6, uneven coating: If you see the primer see, you can add a layer of paint.
7, flakes off: the surface is not treated well, should scrape off the original paint, look good on the surface, repaint.
8. Spots: Apply paint on the surface of aluminum and repaint it.
9, crack: If the two layers of paint are incompatible, it will produce cracks, scrape off the original paint recoating.
10, black spots: sanding and re-coating when dry, wipe the black spots and modified.
Three trees paint paint
Jiangsu Zhongyi Work Rigging Co., Ltd. , https://www.zy-rigging.com