Until now, it has been divided into four categories: 1. Seepage-type polished tiles; 2. Micropowder-type polished tiles; 3. Multi-tube-polished tiles; 4. Microlite.
The first type: seepage-type polished tiles. It is also the most basic type of product. Such products are very common and almost all manufacturers are doing it. The production process is also very simple, is to apply a layer of enamel glaze on the body, about 5MM in the surface layer, and then after two polishing, trimming, chamfering, and then do the anti-fouling treatment can be shipped out of the factory, it should be noted This is the last process - anti-fouling agent, some manufacturers of anti-fouling treatment is very good, with the imported anti-fouling agent, but some manufacturers use is very cheap, and even not anti-fouling Treat with wax.
There are no problems with this type of products. After a long period of time, it will not be very long. It will be about half a year. It will find a lot of missing places, or places like ball printing, and then there will be seepage What kind of soup, tea or anything will seep into the tiles and it will be difficult to clean. This kind of seepage brick is still very popular nowadays, including ultra-white bricks belong to this series.
The second category: micro-powder bricks. Some manufacturers call it superfine powder. What this kind of product says is awe-inspiring. In fact, there is no special process. It is to sprinkle a finer layer of powder on the surface of the blank. The method confirms that the estimate is hanging). The raw materials used for the green body and the surface layer are the same. The powder on the surface is then ball-milled again for a long time. Then the powder was scraped on the blank with a spatula and pressed again. This kind of product has one advantage and two disadvantages. Let's talk about the advantages. The advantage of direct surface fine particles is that it may have low water absorption and strong anti-infiltration ability, but it also depends on the brand. Some small manufacturers make fine powder. Bricks are also highly water-absorbent and have low resistance to seepage.
You may want to choose a good brand with better eyesight. The first drawback is that the design is simple, monotonous, and monotonous. I do not know what word to describe. The texture of all micro-powder bricks is the same, and the pattern is vertical and regular. The effect after the overall paving is very general. Due to technical bottlenecks, this problem cannot be solved. Maybe some people will like it or not, and surely these products have also existed for nearly two years. Personal vision is different, you see it yourself. There is another minor drawback (maybe big problems). Some poor quality products will have cracks in the mezzanine. Whoever makes him twice suppress. If you don't catch up well, no one will worry.
The third category: Multi-tube fabric polishing bricks. The production process of this type of product is rather special. When the powder material is unloaded, it is formed by pressing a lot of material tubes at one time. The texture of these products is very natural, each brick is roughly the same but not the same. Absolutely alternative to marble. However, there is a problem with this kind of product. Your choice is relatively small, and only a few major manufacturers produce it.
The fourth category: microcrystalline stone. The appearance of this type of product in the market is probably more than a year away. There are also many brands in Guangdong now. His characteristics are as follows. The main thing is that basically nothing is dirty. His water absorption is basically equal to zero. You look closely at his side. His thickness is basically comparable to that of three ordinary polished tiles. It is a combination of two layers of substances pressed together, to be honest the surface is a layer of glass. Of course, glass does not absorb water. But there are also its weaknesses, that is not wear, over time will be worn on the shoes with sand, sand = quartz, its Mo-type hardness is much higher than the glass, so the glass can not help but sand friction. The second problem is that because the two press-molded things (as well as the micro-powder bricks) are all the same, they are prone to cracking.
Wardrobe Brand Water Heater Brand Glass Marble Marble Tile Glass Brick Craft Glass Microcrystalline Tile
Nylon Roller Brackets ,Keel Roller Bracket,Bow Roller Bracket,Anchor Roller Bracket
Jiaxing Gates Hardware Products Co.,Ltd , https://www.888gates.com