In 2010, China's domestically produced tool production totaled 29 billion yuan. In addition to supplying the domestic market, the export tool was 7 billion yuan. In the same year, China's tool consumption reached 33 billion yuan, ranking first in the world. This shows that the sales of domestically produced knives in the domestic market last year was 22 billion yuan, and the sales of foreign brand knives was 11 billion yuan, accounting for 1/3 of China's tool consumption. Such clear data is enough to show that China has become the world's most promising tool market. In an interview with reporters, Shen Zhuangxing, honorary chairman of the Tool Tool Industry Association of China Machine Tool Industry Association, said that compared with the international tool market, the domestic tool market has recovered very fast after the financial crisis, and the market capacity has always maintained an upward trend. The rate is also stable at more than 65%, but in the field of high-end tools, domestic tool companies need to make greater efforts. The domestic tool market has great potential for development In 2009, when the financial crisis was rampant, the overall consumption quota of the domestic tool market dropped by only about 15%, while the consumption of the tool market in developed countries generally fell by 40-45%. However, just one year later, driven by strong demand from the manufacturing industry, the total consumption of the domestic tool market quickly recovered and surpassed the historical high level, reaching a record high of 33 billion yuan. In 2011, the domestic tool market still maintained rapid growth, and it is expected to create a new historical high point. According to statistics, in the first half of the year, the domestic tool market achieved a growth rate of 25-30%. Although the growth rate has slowed down since July, it can still achieve 15% growth throughout the year. Shen Zhuangxing said. In comparison, the international tool market has maintained a stable recovery in recent years, but the average annual growth rate is conservatively estimated to remain at around 3 to 5%. The domestic market will gradually maintain an average annual growth rate after experiencing rapid growth in the past year. The growth rate is 10-15%. Therefore, the domestic tool market capacity growth rate will be more than three times faster than the international market. Therefore, Shen Zhuangxing believes that China has become the world's most promising tool market, and many multinational tooling groups are also in the post-crisis era development strategy, without exception, expanding the sales of tools in China as the first choice, companies The Asia-Pacific headquarters, R&D center, training center, and logistics center have settled in China, so that China will be the center of China, and it will serve customers more directly and conveniently, and better meet the special needs of customers in the Asia-Pacific region. The main reason why the Chinese market is receiving such attention is that the proportion of sales in the Chinese market is increasing in its global market share. In order to firmly grasp the Chinese market, foreign tool manufacturers are carefully studying the needs of China's equipment industry. For example, Seco Tools established the Industry Development Department this year, aiming at the industry as a research object, focusing on providing typical parts processing in the industry. solution. The technical experts of the department are responsible for a key industry, paying attention to the development of the industry, solving the technical problems of tool application in the industry, and holding tool training for customers in the industry from time to time. The market share of high-end tools is too small. Although domestically produced tools occupy a dominant position in China's tool consumption market with a market share of 2/3, the high-end domestic tools represented by modern high-efficiency tools are only 2 billion yuan, and the imported tools of 11 billion yuan. Most of them are high-end tools. This should attract the attention of domestic tool companies. In recent years, the technological development of many high-end manufacturing fields in China has brought new requirements to the tools. For example, automotive tools must be characterized by high efficiency, high stability and specialization. With the continuous development of the automotive industry, new requirements have emerged. From a technical point of view, there are mainly heavy-duty, composite, specialization, The trend of standardization, high speed and variety. In the field of aerospace manufacturing, with the wide application of difficult-to-machine materials such as titanium alloys and high-temperature alloys, how to correctly select and rationally use tools for efficient and high-quality cutting has become a very important industry topic. Near-water towers have the first month, and domestically produced tools should have the advantages of time, location and people in providing tool services for the above-mentioned manufacturing fields. But in fact, imported tools basically occupy high-end users in the machining industry, especially in automotive engine manufacturing workshops, aircraft engine manufacturing enterprise machining workshops or steam turbine manufacturing workshops, and highly efficient and high-precision machining tools are almost imported tools. Monopoly, it is difficult to see the traces of domestic knives. Domestically produced tools are mostly used in medium and low-demand customer groups, such as agricultural machinery, motorcycles, agricultural vehicles, general machinery, and low-end machinery manufacturing industries. Not only that, the extensive development of manufacturing has led to an extremely unbalanced development of machine tools and tools. Statistics show that the current consumption ratio of CNC machine tools and tools in foreign developed countries is 2:1, while the domestic ratio is too low, and the total tool consumption is not yet To 1/5 of the total machine tool consumption. Many manufacturers spend a lot of money on machine tools, but they are reluctant to buy tools. They are reluctant to buy advanced and efficient tools. The market demand for traditional tools has remained high for a long time. This is also an important reason why many domestic tool companies are reluctant to enter advanced and efficient tool production. At present, China's metal cutting tools have begun to shift from high-speed steel tools to the development and production of cemented carbide tools, but the strength is not enough, still in the low-end. Therefore, it is imperative to take the transition of high-end products as a very important task, especially the slowdown of economic growth in the United States, the weakening of the European market, and the obstruction of low-end hardware exports. From the perspective of energy and raw materials, a large number of low-end export tools are out of date. The government will not give force. Statistics from the China Machine Tool Industry Association show that China consumes 40% of the world's tool materials, and sales revenue accounts for only 12% to 15% of the world's tools. To this end, the development of China's hardware tools industry during the "Twelfth Five-Year Plan" period will present the following trends: (1) The momentum of high-speed development is unstoppable, due to macro-control, but it is still in the stage of sustainable development. (2) "Speed, precision, efficiency, environmental protection" has become the industry consensus. (3) The competition is fierce. The restructuring and restructuring of state-owned enterprises, foreign-funded enterprises have settled in, private enterprises have risen, the survival of the fittest, poor management, bankruptcy and bankruptcy are inevitable. In response to the above-mentioned severe situation, Luo Baihui, secretary-general of the International Association of Mould & Hardware Plastics Suppliers, pointed out that the domestic tool industry should review the situation and market-oriented, actively adjust the industrial structure, upgrade the product grade, and develop and adapt to the people's livelihood, such as automobiles, high-speed rail, and home appliances. New tool. Looking around the hot machinery, molds, energy and other popular industries in recent years, China's tool market prospects are very broad. Nowadays, China has become a major machinery manufacturing country in the world. Where is the world's tool market in the future? In China, occupying the Chinese market has occupied the international market. However, during this period, we should also see that behind the rapid development, companies are also clearly aware that the high growth rate of the domestic hardware tools industry is not high in gold, and a considerable number of them are at the expense of the environment, with cheap labor as Foundation, the production of inferior products to obtain huge profits. Twist drills, taper shank drills, taps, saw blades and other low-end markets are in a mixed battle, while high-end products are growing slowly. Most of the high-tech, sophisticated, and sophisticated tools in the automotive, mold, and aerospace industries rely on imports. This is also what China's "Twelfth Five-Year Plan" is not allowed to take place. It must be changed and we hope that the enterprises will be vigilant. Chinese tool companies must face up to the gaps between foreign companies, including basic technology, innovation capabilities, promotion capabilities and service capabilities. The user demand and the tool enterprise should be the innovation leader, and the leading enterprises should take the lead in demonstrating the role in technology application. However, Shen Zhuangxing said that some key domestic key enterprises and new excellent private enterprises have taken a very gratifying step in the development of modern and efficient tools, such as Zhuzhou Diamond, Xiamen Golden Heron and Arno Tools. These companies attach importance to technological progress and will serve In the first place, it has achieved remarkable results in related fields.
Firefighting Pressure Gauge
Y40 series firefighting pressure gauge is designed and developed according to the GA400-2002
National Public Safety Industry Standard for use in the fixed firefighting system. The instrument is characterized by reasonable design of overall structure, reliable performance and stability under normal pressure.
Firefighting Pressure Gauge,Fire Pressure Gauge,Hydrant Pressure Gauge,Pressure Gauge For Fire Protection Service
wuxi kaifeng pressure gauge co., ltd , https://www.wxkfmanometer.com