For advanced equipment such as sprayers, the efficiency of our spraying operations has been improved, and the spraying has become more uniform and beautiful. The knowledge of the use is incomprehensible, and any equipment will have some minor faults in the process of use, then the maintenance knowledge must know something. Here, Shanghai Transonson gives everyone a comprehensive consideration. You provide methods of use and repair as follows:
Instructions:
1. For the material that has been sprayed to be covered, the spraying equipment used must not collide with the protective equipment.
2. For all kinds of pipes, it is necessary to wrap the pipe mouth before spraying.
3. When spraying the edges of doors and windows, pay attention to blocking the doors and windows.
Before using the sprayer, remember to keep the gears in place, otherwise the project will be in vain.
Maintenance method:
For equipment failure, it is definitely inevitable in the process of use, but as long as you understand the self-repair method after the failure, it is easy to solve and eliminate the problem.
Fault 1, automatic spray paint machine does not spray oil
Method of exclusion:
1. Check whether the oil pump is oiled, whether the air pressure and oil pressure valve are adjusted to a certain pressure, whether the oil circuit is blocked or cleaned;
2. Whether the spray gun starter switch is high enough, press the starter spray gun thimble to bounce; if it does not produce oil, clean the inside of the spray gun and the gun cap. Note that the spray gun oil seal cannot be immersed in corrosive liquid such as toluene to prevent deformation damage.
Fault 2, automatic painting line can not be transported
Method of exclusion:
1. Check if the inverter is started and the parameters are correct.
2. Whether the chain is stuck or broken;
3. Whether the motor is running or not, whether the overload protection switch is reset
Fault three, automatic spraying line robot does not move
Method of exclusion:
1. Check whether the robot has an alarm signal, and ask the professional maintenance personnel to solve it according to the alarm signal;
2. Press the robot back to the origin to observe whether there is a return to the origin and normal state;
3. The servo motor wire head is loose and re-tightened;
4. Please inform the manufacturer for repair when the servo motor is faulty.
The above is the knowledge content prepared by Shanghai Talan's Xiaobian for everyone. I hope it will be useful to everyone. If you have other knowledge to understand, you can continue to browse other pages of our website.
Concerned about surprises
Label: Sprayer Yes No Use and repair Collision protection Repair method
Previous: Advantages and disadvantages of air spraying Next: Application of aluminum profile oxidation production line
Economical Injection Masterbatches are the most common Black Masterbatch. This black masterbatches are made with recycle PE/EVA carrier, has low or middle carbon black, has calcium carbonate. It has the advantages on the prices, and universal applications for PE production, such as blowing film, injection, extrustion, molding so on.
Economical Injection Masterbatches
Injection Black Masterbatch,Economy Injection Masterbatch,Plastic Masterbatch For Injection,Injection Machinery Black Masterbatch
Anda Masterbatch( Group) Co., Limited , http://www.polymer-masterbatch.com