Collecting classical furniture for more than ten years, one of its biggest feelings is that classical furniture is also like people, and it also has its "health of health." Only with careful maintenance, can we let it go through the vicissitudes of life.
As we all know, Chinese classical furniture is connected by hoes instead of nails, and wood will expand and contract with changes in temperature and climate. Therefore, its placement is particularly important, classical furniture should be placed in places that are not exposed to sunlight, but the surrounding environment humidity should not be too large. Otherwise, it will damage its material, causing the wood to crack or crisp and easy to fold. Especially redwood, it is not as stable as red sandalwood and huanghuali, and the climate change has a great influence on it. Regardless of the classical furniture of the collection, the room temperature is preferably controlled at 20 to 30 degrees Celsius, and the humidity is preferably between 40% and 50%.
Some people say that classical furniture is "scratched". It should be noted that the wet cloth is the natural enemy of the ancient furniture, because the water and the sand in the wet rag mix together to form a granular object, which is very likely to scratch the surface of the furniture. For dust on classical furniture, we can use a fine, soft brush to gently rub the dust, and then slowly wipe it with a dry cloth of cotton and linen. Of course, Tibetans can also use vacuum cleaners to clean up the difficult parts of the carved parts and hollow parts of classical furniture. If the furniture is stained, wipe it with a small amount of water-soluble or oily detergent. It should be noted that the dust on the surface of the furniture can be waxed after it has been cleaned, otherwise the dust will cause wax spots and scratches. Generally, waxing and water waxing can be used. In addition, the number of waxing should not be too frequent, one or two weeks. When waxing, follow the principle of from point to face, from shallow to deep, and gradually deepen.
Collecting classical furniture, it is inevitable that you will encounter bumps and bumps and other scratches. Once the dents appear in the classical furniture, we can wipe the damaged area with a damp cloth. After a while, observe whether the damage is slightly expanded by absorbing moisture. If there is no change, you can put a damp cloth on the furniture. The iron is ironed at a low temperature to swell the recessed area and then smooth it with fine sandpaper. If the classical furniture is scraped, we can apply a layer of cod liver oil and wipe it after a day or two.
The most important thing is that when collecting and maintaining classical furniture, Tibetans should regard it as a living object. Only in this way, classical furniture will exude its unique "spirituality".
The function of a SPGO is to contain pressure on one side of a piston without leakage and therefore allow maximum effort to be applied to moving the piston along the bore of a cylinder. Consideration needs to be given to the pressures expected, the friction losses acceptable, whether a double acting capability is required, and whether the piston head is integral or split.
Excavator SPGO Seals
Excavator SPGO Seals,Hydraulic Seal SPGO,Piston Seal SPGO,SPGO Glyd Ring
Shenyang ZhongYe Seals Factory ,