1. Preparation before using the sludge filter: (1) Remove all debris from the filter press, filter plate and filter cloth. (2) Check if the sludge filter press and its components are good. (3) Check the oil level value of the oil pressure unit. (4) Check if the position of the filter plate of the filter press is biased or dislodged. (5) Check if the filter cloth is securely fastened. (6) Check if the pneumatic diaphragm pump is normal. (7) Whether the filter plate of the filter press is deformed or not. (8) Check if the air compressor and the adjuster (three-point combination) are normal. (9) Check if the supply of liquid medicine, clean water, sludge and air is normal. use: Second maintenance and maintenance: 1. Before the vehicle is driven, the liquid to be delivered should be filled in the pump (if the pump is sucked up), close the outlet gate valve and connect the power supply. 2. Turn on the power and check if the pump is turning correctly. 3. The unit is commissioned for 5-10 minutes. If there is no abnormality, it can be put into operation. 4. When stopping, first close the gate valve of the outlet and then cut off the power. 5. When the machine is not used for a long time, the flow path inside the pump should be cleaned and the power supply should be cut off. 6. Regularly check the pump and motor and replace the vulnerable parts. 7. It is strictly forbidden to run empty. |
Safety Workwear,Safety Uniform,Safety Clothing,Safety Protective Clothes
Xinxiang Worldbest Patron Saint Co., Ltd , http://www.xxhyhsworkwear.com