Bearing Overhaul and Maintenance

---

When it comes to bearing maintenance, proper disassembly and cleaning are crucial steps in ensuring the longevity and performance of the bearing. If you're removing a lower bearing for inspection, start by recording its appearance and checking the remaining lubricant. After sampling and analyzing the lubricant, proceed with washing the bearing using suitable solvents like gasoline or kerosene. During the removal process, there are two main stages: coarse cleaning and fine cleaning. Avoid leaving the bearing directly in the container. Instead, place it on a metal mesh to prevent direct contact with dirt or debris. When performing the coarse cleaning, be cautious not to rotate the bearing while it's contaminated, as this could damage the rolling surfaces. Use a brush to remove grease and adhesives during this stage, then move on to fine cleaning. In the fine cleaning phase, gently rotate the bearing while cleaning it thoroughly. Always ensure that the cleaning oil remains clean throughout the process. This helps maintain the integrity of the bearing components and prevents contamination. After cleaning, inspect the bearing carefully. Check the raceway surface, rolling elements, and the condition of the cage. Also, examine the fit between the inner and outer rings and measure the bearing clearance. Look for any signs of wear, damage, or irregularities. For small ball bearings, you can test them by holding the inner ring horizontally and rotating the outer ring to see if it moves smoothly. For tapered roller bearings and other separable types, inspect the rolling surfaces of both the rollers and the outer ring. For larger bearings, manual rotation may not be feasible, so visually check the rolling elements, raceways, cage, and rib surfaces. The more critical the application, the more thorough the inspection should be.

---

**Recommended Reading:** Bearings play a vital role in various mechanical systems. Understanding the five major types of bearing arrangements, their functional characteristics, and how to properly adjust them is essential. Whether it's a single-row roller bearing, a support bearing, or a specific type like SKF or FAG, knowing the right maintenance techniques can significantly extend the life of your equipment. This article is linked to http:// Please cite China Bearing Network at http:// Previous: Bearing Skill Conditions Next: FAG Bearing Introduction --- *Note: This content has been rewritten and expanded to provide a more natural, detailed, and informative guide on bearing overhaul and maintenance, making it more suitable for real-world use.*

Vibratory Roller

Vibropac Machinery Co.,Ltd , https://www.vibropac-power.com