Masonry construction process

Masonry is an extremely important part of the renovation process. Everybody must be careful when it comes to renovations. This is related to the quality of the renovation. Although the masonry works are not like wallpapers and paints, the exquisite home improvement effect is Masonry projects are inextricably linked. It is absolutely impossible to ignore the details of the renovation of the masonry projects. Today, Xiao Bian gave you an introduction!

The approximate process of a masonry project consists of the following steps: According to the requirements of the design, some structural transformations are carried out (no change is not required), the hydropower construction ditch is leveled, then the floor is waterproofed, the ground is leveled, and then the tile is laid. The division of the masonry project will be decomposed to all owners.

First, structural transformation

Many owners are not very satisfied with the original structure of the house, so they will choose to make some changes to the original structure in order to make the house unique design, such as the removal of the partition wall of the kitchen, making it open Kitchen and so on. This is of course an expression of great ideas. However, the transformation of the home structure involves safety issues. Therefore, the following five principles should be followed during the renovation process:

1. For "brick and concrete" structures, all prefabricated walls cannot be removed.

It is also not possible to open windows, especially brick walls with a thickness of more than 24 cm, which are generally load-bearing walls and cannot be easily dismantled and modified.

2. The door frame is embedded in the concrete and should not be dismantled

If it is demolished or remodeled, it will destroy the building structure, reduce the safety factor, and it will be more difficult to re-install the door.

3, the low wall of the balcony can not be removed or changed

There is a window on the wall between the general room and the balcony. The doors and windows can be dismantled, but the wall below the window cannot be removed, because this wall is a “counterweight wall” and it acts like a scale to lift the balcony. The effect is that if the wall is dismantled, the bearing capacity of the balcony will drop, causing the balcony to fall.

4. Columns in the room cannot be changed

Beams and columns are used to support the upper floors. Demolition or renovation will cause the upper floors to fall down. It is very dangerous, so the columns and columns must not be demolished or modified.

5. The steel bars in the wall cannot be moved

When the pipeline is laid, if the steel bar is damaged, the bearing capacity of the wall and the floor will be affected, leaving potential safety hazards.

Masonry works

1 23 Next> Total 3 Pages
Page to page
Function assignPage() { var page = $('#page_val').val(); if (/_\d+\.html$/.test(location.href)) { location.href = location.href.replace( /_\d+\.html/, ((page == 1) && 1? '' : '_' + page) + '.html') } else if(/\/\d+\.html$/.test (location.href)) { location.href = location.href.replace(/(\d+)\.html/, ((page == 1) && 1? '$1' :'$1_' + page) + ' .html') } } $(function(){ $('#page_form').submit(function() { assignPage() return false; }) $('#page_btn').click(function(){ assignPage( ); return false; }) }) See full story

Wheels

Wheels,SlidingGateWheels With Bolt for Heavy Door,SlidingGateWheels With Bolt for Garage Door,SlidingGateWheels With Bolt for Factory Gate

Xiamen XMillion Co.,Ltd. , https://www.xmilliondoor.com