Precautions when using electrical shoes for electrical workers

The insulation shoes shall be correctly selected according to the voltage level of the workplace. Low-voltage insulation shoes shall not be used as safety aids on high-voltage electrical equipment. High-voltage insulation shoes (boots) may be used as auxiliary safety devices on high-voltage and low-voltage electrical equipment. However, no matter if you wear low-voltage or high-voltage insulated shoes (boots), do not touch the electrical equipment with your hands. For insulation shoe specifications can refer to electrical insulation shoes.
When electrical work, according to the provisions should wear insulation shoes for insulation protection, then friends engaged in electrical work when selecting shoes should pay attention to what issues:
1. The use of insulating shoes (boots) must not be damaged. Insulation shoes where the bottom of the corrosion damage, can not be used for electrical insulation shoes.
2. When wearing insulation boots, put the trousers into the boot. When wearing insulating shoes, the length of the trousers should not be long and the height of the outer edge of the sole, but not the length and the ground, to keep the cloth dry. When wearing insulating shoes, avoid touching the sharps. Do not nail nails on the soles to prevent the insulation performance from deteriorating.
3, low-voltage insulation shoes polished if the bottom pattern, exposed when the internal color can not be used as insulating shoes.
4, in the purchase of insulating shoes (boots), should check whether there are permanent insulation marks on the shoes; insulation shoes in storage, since the factory day more than 18 months, should only conduct electrical performance preventive testing!
5. The appearance and color of the insulating shoes should be significantly different from other protective shoes or daily life shoes, and should be marked with "insulation" in order to facilitate identification and prevent misuse.

6. The length of insulation shoes outer wear scars should be no more than 10mm; the wear reduction of electric insulation fabric shoes is not more than 1.4cm3; the wear reduction of 15kv and electric insulation rubber boots is less than 1.0cm3; 20kv and above electric insulation rubber boots The wear reduction is not more than 1.9cm3.

This website solemnly declares: This article is a reprint of the online media, only represents the author's point of view, has nothing to do with the China Labor Insurance Network. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.