Analysis of the market prospect of coated aluminum square

Prospect of the laminated aluminum square pass market The coated aluminum square pass is a surface treated PVC ceiling material, which is characterized by flame retardant, moisture proof, corrosion resistant and anti-aging. There is also easy to clean. The disadvantage of this aluminum square pass is that it cannot be exposed to the sun and cannot withstand high temperatures.

The thickness of the coated aluminum square pass is limited, the thinness can not be lower than 0.5, and the thickest thickness can only reach 1.0. These all make the laminated aluminum market share not too large. Why can't the laminated aluminum square pass continue to be thinned or thickened? This is because most of the laminated aluminum square pass is extruded by rolling mode. If it is too thin and easy to deform, if it is too thick, it will be rolled. Not coming out. Therefore, it can only be maintained between 0.6 and 1.0. There is also a 0.6-thick size limit, generally not suitable for the bottom surface is greater than 6 cm, the height is not higher than 10 cm, and the length is not more than 6 meters.

From the above simple analysis, it can be seen that due to the limitations of the processing equipment and the product itself, the specifications of the laminated aluminum square pass are limited, which affects the market adaptation range, and the market share of the laminated aluminum square pass is not too large. In fact, the best application of coated aluminum square pass is the shop, office, restaurant and other places where the area is relatively small, and the requirements for the laminated aluminum square pass are not too high, so the most used.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Oilless Vacuum Pumps

Vacuum Pump Types,Edwards Vacuum Pump,Liquid Ring Compressor,Value Vacuum Pump

Dongguan Beqile Mechanical&Electrical Equipment CO.,LTD , https://www.betemvacuum.com