(1) Coating equipment is inseparable from solvents. There are many parts that are resistant to solvents.
(2) The paint is flammable and explosive, and many parts of the equipment should be treated with flame retardant and explosion-proof.
(3) The coating process requirements are relatively fine, and the equipment precision requirements are relatively high.
(4) The equipment load is low and there are few heavy equipment.
(5) Painting equipment is easier to plan the production line and save labor.
(6) The running speed is relatively slow.
Safe use of painting equipment
(1) Equipment operators must be proficient in the construction, performance, operation and maintenance methods of various machines, and be used by special personnel and personnel.
(2) When operating woodworking machinery, wear overalls and tie the cuffs. The lesbians must wear a work cap and put the tweezers into the cap; do not wear gloves or scarves.
(3) Before the machine starts work, it must be tested before the parts can work normally.
(4) Protective covers and protective plates shall be provided for shafts, chains, pulleys, belts and other operating parts on the equipment.
(5) If there are abnormal conditions or other failures during mechanical operation, the power should be cut off immediately and the vehicle should be shut down for maintenance.
(6) The surrounding of the equipment is mostly flammable, and fireworks should be strictly prohibited.
(7) When commissioning maintenance equipment, the main power supply must be cut off.
Concerned about surprises
Label: Painting equipment Painting process Safe use Equipment operation Protective plate
Previous: Domestic door and window hardware explores a new way out of technological innovation Next: What is a manual baler?
Industrial applications editor broadcast
Whetstone sintered corundum (ruby) : A kind of microcrystalline corundum product sintered at high temperature. It has a compact and delicate structure and high hardness and strength.
The products are rosy red. The products are small grinding wheel type whetstone, standard type whetstone and grinding head type whetstone. When grinding the workpiece, it can maintain sharp edge and stable geometry for a long time.
It is suitable for forming and grinding of instrument industry, precision parts, micro cutting tools, tools and precision abrasive tools, etc. The precision surface roughness of machining can reach about 0.05μm.
Product SPECIFICATIONS: flat sand wheel whetstone with diameter less than 100 for small grinding wheel type, whetstone with various geometric shapes less than 200*50*25 for standard type, whetstone with diameter less than 25 for grinding head type.
Grinding method
About diamond grinding paste, particle size from W40 to W0.5. W40 is the coarsest, with a large amount of grinding, and W0.5 is the smallest. It is used for polishing, and it does not anneal, and it can also grind the hard knife.
Method of use:
The coarse W40 abrasive paste applied to borotartar can accelerate and increase the grinding amount without annealing.
Then, AFTER the rough grinding paste on the knife is cleaned, W0.5 grinding paste is applied to the ruby or natural jade for polishing, and the effect thrown out is a mirror.
Green silicon carbide, white corundum, brown corundum of these three kinds of whetstone hardness is not enough, coupled with a little coarse particle size, easy to grind out the cross, and the other three kinds of whetstone in polishing, grinding will not annealing.
If the particle size is greater than 1000, there is no difference. It mainly depends on the grinding paste used. When the grinding paste of W1.5 is applied to the ruby with 1000 mesh, its grinding effect is the effect of the grinding paste of W1.5, that is, the effect of the whetstone with 2500 particle size
Grinding Stone,Diamond Grinding Pellets,Carborundum Oil Stone,Oilstone Sharpening Stone
Henan Jinlun Superhard Material Co., Ltd , https://www.kmgrindingwheels.com