Pump room design size requirements

Many houses in the construction did not consider the design of the pump room, leading to the latter part of the pump installation is not standardized, the pipe is like a spider web, difficult to manage, inconvenience to the subsequent maintenance and disassembly, Xiaobian here to sort out the water pump room Design size requirements for user reference. Pump room 1, pump room specifications, pump room should be based on the number and size of pumps, in general, the motor capacity is less than 55kw /, the clearance between the two machines shall not be less than 0.8 meters When the motor capacity is greater than 55kw, the two machines Clearance between no less than 1.2 meters. 2, the height of the pump room generally have 3 meters, high-voltage power distribution equipment, housing height, should be determined according to electrical equipment dimensions. If the pipelines overhead laying, the pipe from the ground should not be less than 2 meters. 3, distribution box in front of the channel width, low voltage distribution not less than 1.5 meters, high voltage distribution not less than 2 meters. 4, the distance between the two adjacent units protruding part, and the distance between the protruding part of the unit and the wall should ensure that the water pump shaft motor rotor can be disassembled during the inspection and not less than 0.8 meters. If the motor capacity is more than 55kw, it shall not be less than 1 meter , As the main channel width of not less than 1.2 meters. Further Reading: pump valve pipe fittings Exhibition Water Expo Xiamen exhibition of marine equipment Internet + Forum Yiwu Fair 2016 exhibition mold top ten brands of the Internet information industry (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / WeChat: 2355962924) http://beng.liuti.cn/ (Service Hotline: 400-6030-811)