Many people nowadays like to decorate tiles on the wall because they have a very important influence on the visual effect of the entire space. The tile-laying technique is an important part that can't be neglected. Tiles are used as home wall surface and floor surface finish materials, and their tile laying standards and tile laying methods have an important influence on their visual effects. The following small series for everyone to introduce good and bad tiles on the wall and the main three tiles.
Tile on the wall is good
1. If you use a tile to decorate it, it will make your home look a lot better, and there are many graphics to choose from. You can also choose the tile wall according to your favorite style, for example, the localized style. , European and American styles, non-mainstream styles, etc. You can also make your favorite picture the wall you want.
2, because the production process is to burn the pattern on the tile or sculpted and then finally get the color up, so the visual look is a great enjoyment, basically no change in color, moisture, etc. will not be like wallpaper It was not wet for a long time.
3. It is also important that one thing is made because it is based on your personality. It can be made according to your decoration requirements and actual size, so it can be said to be unique in most areas near you.
4, tile walls as a living room decoration highlights, can reflect the owner's taste and artistic conservation, so how to use the TV background wall and material are very important, and tiled TV background wall allows you to solve this problem.
5, sound insulation, heat insulation.
6, protect the wall, blocking toxic gases.
7, safe, not easy to damage.
8, construction is convenient.
9, easy to clean, only need to use water and dry cloth can be.
The main three points of tiling
First, appearance inspection
1. Check if the direction of the tiles is correct and whether there is reversal.
2. Whether the tile and waistline position is correct, whether there is deviation or height error.
3, to see if there is a scratch mark, tile laying process, it is easy to accidentally scratch or damage the ceramic tile. When checking, check whether there are scratches or hard-to-remove stains on the surface of the tile, and whether the brick surface is broken or chipped.
4. Check for cracks. Normally, under the condition of natural light exposure during the day, check the brick surface for crack cracks by using eye and hand touch. The crack refers to the cracking of the surface of the brick surface, but the bottom of the tile is intact. The hand touch has a slight feeling of cutting; the crack refers to the cracking of the entire brick surface from the surface to the bottom, and the hand feels a clear cut.
5, to see whether the gap is uniform, in order to deal with the problem of thermal expansion and contraction of tiles, and to ensure that the tile laying effect of the straight, when laying tiles, bricks and bricks need to stay in the seam. Acceptance need to check whether the tile gap is even and beautiful, the general brick seam width is 1mm, can not exceed 2mm, special effects can also widen the gap, such as 5mm and so on. In addition, check the tightness of the edge of the tile.
Second, emptying rate inspection
One of the problems that can easily occur in tile laying is emptying. If the tile emptying phenomenon is serious, the wall tiles will easily come off, and the floor tiles will step on and move. Therefore, when the tile is accepted, it is important to check whether there is hollowing in the tile.
The empty tile inspection, you can use a small iron bar to hit each tile, by the sound of the sound of the tap to determine whether the empty drum. If the percussion sounds dull, it means that the paving is more solid. On the other hand, if you send out a "squeaky" sound, it means that the walls and floor tiles are not stuck firmly and empty. The criteria for the emptying of tiles is that the emptying of floor tiles should be controlled within 3%, and empty drums should not appear on the main channels; the emptying of wall tiles should be controlled within 5%. If it exceeds the standard, the paving staff may be asked to relocate the bricks.
Third, the flatness and verticality check
1, verticality detection. Walls of bathrooms and kitchens are often tiled, and it is necessary to check whether the walls are horizontal or vertical. Let's first look at how to check the verticality of the tile facade. You can use the 2M ruler to check if it is vertical, but you can't accurately measure the existing deviation, but you can use the 2M vertical ruler to detect the deviation. Place the left side of the vertical inspection ruler against the measured surface, and then wait for the pointer to stop swinging. Then read the index value of the pointer. This value is the vertical deviation of the measured surface, and each cell is 1mm. Tile verticality is generally within 3mm.
2, flatness testing. When detecting the flatness of the tile, it can be detected with a vertical inspection ruler, or it can be detected with a 2M ruler and a wedge feeler. When the latter method is used to measure, the side of the ruler is pressed against the surface to be measured, and the size of the gap is detected by a feeler feeler. Each site should detect three points, namely a vertical point, and cross each point at 45° in its original position, taking the average of the three points. Tile flatness error should not exceed 2mm, height difference of adjacent tiles must not exceed 0.5mm.
Editor's summary: The main three points on the wall tile and tiling are introduced here, and I hope to help everyone. If you want to know more about yourself, you can follow the information on this site.
Tiles on the wall are good
Steel Structure Warehouse has the
advantages of high area usage; fast installation; long span, low cost and
recyclable etc, and widely used around the world.Own professional advanced equipment,such as Steel Structure automatic welding lines,color steel molding lines and production lines for the C-section and Z-section steel purlins etc.Our professional engineer and design team will provide the steel structure drawings for you.Please just let me know the informations as below.
1. Measurement: length, width, eave height
2. Area and local climate: wind speed, snow load and earthquake magnitude etc.
3. Materials of the roof and the wall you want,usually it can be corrugated steel sheet or sandwich panel.
4. If need crane. If yes, please tell me the max lifting weight and max lifting height.
5. Any other requirements,please also inform us.
6. If you have your own drawings,please feel free to send us for the detailed quotation.
Steel Structure Warehouse
Steel Structure Warehouse,Low Cost Steel Structure Warehouse,Prefabricated Steel Warehouse,Steel Structure Warehouse Workshop
Zhongda Steel Structure , https://www.zhongdametal.com