Stainless steel magnetic pump use what are the considerations

Speaking of the use of stainless steel magnetic pump, many people will find it very easy to use properly, but you know, the stainless steel magnetic pump in the process is also a lot of considerations, if neglected It may cause it to malfunction. Here we introduce the use of stainless steel magnetic pump considerations. 1, Due to the cooling and lubrication of magnetic pump bearings are transported by the medium, it is absolutely forbidden to move freely, while avoiding the power outage after the start of the time-space load operation. 2, was transported medium, if it contains solid particles, the pump inlet to add filter: If containing ferromagnetic particles, the need to add magnetic filter. 3, the pump should be used in the ambient temperature should be less than 40 ℃, motor temperature rise must not exceed 75 ℃. 4, the medium being transported and its temperature should be within the allowable range of the pump (see the attached table). The temperature of the metal pump is less than 100 ℃, the specific gravity of the conveyed medium is less than or equal to 1.3, and the specific gravity of the medium is less than 1.3, the technical performance will be affected. 5, for the transmission fluid is easy to precipitate crystallization of the media, after use should be promptly cleaned, drain the pump effusion. 6, self-priming pump operation 500 hours, the bearing should be demolished and end face ring wear, if the bearing and sleeve clearance greater than 0.5 ~ 1mm, impeller axial play 0.5 ~ 2mm, should replace the bearing and axial Moving ring. These are the stainless steel magnetic pump considerations which have a brief introduction, hope that through these introduction, after you use the stainless steel magnetic pump can learn practical, better and correct use of it. Further reading: Canton Fair IFAT China building water pump manufacturers ranking article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: lindj (QQ / micro-channel : 181817456) Starting: http://beng.liuti.cn/ (Service Hotline: 400-6030-811)