It is always a shame to mention the toilet, but the toilet leaks so frequently that people have to mention it. If you accidentally encounter the leakage of your home's toilet, don't worry, the reason for the leaking of the toilet is nothing more than the following. If you have money, don't be willful. If you try it yourself, it's better to find the right medicine.
Common causes of leaking toilet
1. Some manufacturers blindly reduce the production cost. The inferior materials are used to cause the water inlet of the inlet valve and the inlet pipe to crack when injected, resulting in failure of the seal. The water in the water tank flows into the toilet through the overflow valve overflow pipe, causing “long flowing waterâ€.
2. Excessive pursuit of miniaturization of the water tank fittings, resulting in insufficient buoyancy of the floating ball (or floating bucket). When the water floods the floating ball (or floating bucket), the inlet valve cannot be closed, so that the water continuously flows into the water tank, and finally Water leaking from the overflow pipe into the toilet. This is especially true when tap water pressure is high.
3. Cause the water tank fittings to interfere with each other during operation, resulting in water leakage. For example, when the water tank is discharged, the float ball and the float rod fall, which affects the normal reset of the flap, resulting in water leakage. In addition, the float rod is too long, and the float ball is too large, causing friction with the tank wall, affecting the free rise and fall of the float ball, resulting in seal failure and water leakage.
4. The joints of the drain valve are not tightly sealed. The non-disposable formed drain valve is not tightly sealed due to the joint. Under the action of water pressure, water flows into the toilet from the interface gap through the overflow pipe, causing water leakage. The lifting inlet valve can be freely changed in height. If the sealing ring is not tightly matched with the pipe wall, water leakage often occurs.
Toilet leakage treatment
Check if the flush switch is reset. Some plastic toilet flushing switches have been worn for a long time and occasionally get stuck and can't be regained. It is usually reset by repeating the switch several times. Check if the rubber gasket under the ball valve is aging, the seal is not strict, and the problem needs to be replaced.
Check whether the connection between the spherical float and the water inlet switch of the water tank is loose, the float is in place and the switch is not closed, so that the water does not stop. When the water is full, it will flow out from the upright drain pipe, just tighten the connection of the float and the water valve switch. . If the rubber ball valve is damaged, the seal is not strict, and water leakage occurs, and it needs to be replaced immediately.
The water tank leaks, basically the problem of the drain valve. Check the rubber plug at the water outlet of the water tank. If the rubber plug of the water outlet is damaged or blocked by foreign matter, the plug is not tightly sealed, and the toilet water will not stop. If the water supply pipe in the water tank is placed incorrectly, it will affect it more or less.
Emergency Lighting System,Emergency Lights For Home Power Failure,Rechargeable Emergency Light,Led Emergency Lights
Foshan Nai An Lighting Electric Co.,ltd , https://www.fsnaipsled.com