Heavy Type Clip Bar Chair (SP0302B)

Plastic space block for protective layer of reinforcing steel bar is designed according to the requirement of national steel concrete construal design norm. It is widely applied in the civil and industrial construction of buildings, roads, bridges, tunnels, airports, subway and so on. And the clip style spacer usually used in the bevel of the construction. Clip plastic special use at the inclined plane.

Product Character: Having the advantages of high bearing capacity, self locking, crash-proof, good coherence, and easy operation. It is free from the potential quality problems of instable thickness of the protective layer resulting form the use of traditional materials of coprolites and sands.

Code: SP0151B-SP01801B, protection layer: 15mm-80mm
Executive Standards: GBT10-89 Q/SJLX01-2000
Compression Strength: ≥ 4.2Mpa
Tensile Strength: ≥ 4 Mpa





  Plastic space block for protective layer of reinforcing steel bar is designed according to the requirement of national steel concrete construal design norm. It is widely applied in the civil and industrial construction of buildings, roads, bridges, tunnels, airports, subway and so on. And the clip style spacer usually used in the bevel of the construction. Clip plastic special use at the inclined plane.

Product Character: Having the advantages of high bearing capacity, self locking, crash-proof, good coherence, and easy operation. It is free from the potential quality problems of instable thickness of the protective layer resulting form the use of traditional materials of coprolites and sands.

Code: SP0151B-SP01801B, protection layer: 15mm-80mm
Executive Standards: GBT10-89 Q/SJLX01-2000
Compression Strength: ≥ 4.2Mpa
Tensile Strength: ≥ 4 Mpa





 

Corner Cube Prism

Corner cube Prism is also named retroreflector or trihedral prism.In the corner cube prism,three reflecting surfaces are perpendicular to each other,like the side wall of the cube.The input surface is perpendicular to the cube diagonal. Disregarding the anlge of the incidence,the output beam is parallel to the input one,but it is of opposite direction. Inset of the several corner prisms, for better matching,their extrance exit surface is often hexagonal.In case of this prism the phenomenon of full internal reflection occurs so it is not necessary,(however it is possible)to put mirror coating on the reflecting faces. Normally the reflection surfaces are AL reflection coating, and then covered with Cu and Black painting.

Pyramid prism/Corner Cube Retroreflector is always used to reflect the beam entering the prism face, regardless of its orientation to the beam. Corner cubes are widely used where precision alignment is difficult.

Corner Cube Prism

Corner Cube Prism,Corner Cubic Prism,Optical Corner Cube Prism,Glass Corner Cube Prism

China Star Optics Technology Co.,Ltd. , https://www.opticsrealpoo.com