Quick connector based on the introduction of the purchase

Quick connector, is a kind of connector can be connected or disconnected without tools. Quick connectors can be divided into: quick connectors for air, quick connectors for oxygen fuel gas, quick connectors for gas and liquid, quick connectors for hydraulic pressure, quick connectors for inert gas, quick connectors for cooling oil temperature and semiconductors. Optional basis: 1, the fluid type, temperature (please select the type of fluid, the temperature of the body material and the sealing material quick connector) According to the fluid, suitable body material, sealing material is different. For example, the quick connector is air. Recommended steel, the water is selected brass or stainless steel. 2, the pressure of the liquid (please select the fluid pressure pressure performance of the quick connector) the pressure of the fluid is the key to select the quick connector. The quick coupling for hydraulic pressure is serialized between 5.0 MPa (51 kgf / cm2) and -68.6 MPa (700 kgf / cm2), and the construction of the quick coupler is also different depending on the pressure resistance characteristics. 3, the structure of the automatic switch valve (please select the pipe fittings for the rapid construction of the valve) For the valve structure, there are two switch type, one-way switch and two open. As in the separation in addition to two-way switch, there is fluid out of the pipe. So please note. 4, Quick Connector Usage Environment (Please select a quick connector that is suitable for the use of the environment structure and material) Considering the use of the environment, humidity conditions, dust conditions and easy corrosion, to consider the type of quick connector, the body Material, sealing material. 5, the shape of the installation, size (please determine the final shape, size, ordering products) quick connector can save time and effort, fuel-efficient, environmentally friendly, easy to transport, determine the quick connector model and material, and specify the corresponding Piping characteristics of the assembly shape and size. The size is related to the fluid flow.