The decoration of the bathroom just after the renovation of the new house should be the most troublesome because the bathroom is a place with lots of details. The frequency of using water all year round is very high. There are many details that require us to pay attention. After the sanitary ware is installed , it is convenient. Future use. So, what are the details that sanitary ware should pay attention to? The following is a guide to the installation of sanitary ware . Let's take a look.
1, sanitary ware installation guide
a. Washbasin: first determine the height of the installation; then, mark and punch the position of the screw hole that needs to be punched; then insert the expansion bolt; then install the pelvic rack, adjust the level of the washbasin, and connect the water pipe, Install the tap.
b. Faucet: First check the fittings of the faucet; The inlet hose connects the main body of the faucet; Place the faucet flange in the hole of the basin, and then connect the connected hose through the faucet inlet hole; then, fix the faucet The main body, at the same time, the other side of the water inlet hose is connected to the water outlet outlet valve.
c, toilet: First, the toilet is aimed at the drain; Second, the use of electric drill holes or holes; Then, put the putty after installing the toilet flange; In addition, the toilet is located at the outlet, while installing and fixing A good nut; finally, install the tank.
2, install the guard should pay attention to what details
a, sanitary ware in the installation is a certain rule, the steps must not be wrong, in addition to the bathtub and the toilet, other sanitary ware should be installed after the basic completion of the toilet can be.
b. Some fixtures need to be supported when they are installed, so they should be laid well in advance. In addition, when the sanitary ware is embedded in the bracket, in addition to a certain degree of flatness and firmness, it should also be tightly attached to the appliance, and the bracket should have good corrosion resistance. The screws and bolts used for fixing should be galvanized products, and appliances. You should add some rubber pads when touching.
c. The waterproof work of the bathroom must be in place. The installation of the drainage plug and the floor drain must be level and solid. It should be lower than the drainage surface. After the equipment is installed, pour the water into the bathroom and check whether the toilet will leak. If not, the waterproof layer will be completed.
Xiao Bian concludes: The above is the introduction of the sanitary ware installation strategy and installation of guards need to pay attention to what details of the introduction, I believe that everyone through the above content after learning, whether it is a toilet or other guards can quickly install it, It does not need to spend money to ask the master to help deal with, and according to the corresponding steps to the installation can be.
Hand Sanitizer, Washless Hand Gel, Hand Gel, Waterless Hand Sanitizer
GUANGZHOU HTD INTERNATIONAL , https://www.maskhtd.com