1. Pay attention to the steam engine and computer control board when purchasing. The heart of the steam room is the steam engine. If the steam engine does not pass, it will take less time to get worse. It is better to not use the steam room. According to industry insiders, the currently used steam engine brands include the Guangdong Jintian Sauna Swimming Pool Equipment Factory, JNTAN, GOLDAY, etc. Other brands are mostly converted from ordinary electronic factories. weak. In addition, the computer control panel is also the heart of the steam room. Since all the function keys of the steam room are on the computer board, once the computer board has a problem, the entire steam room cannot be activated, so be sure to ask at the time of purchase the warranty period for the steam engine and the computer board.
2. Focus on the plate in the steam room. It is understood that the plates currently used in the steam room are mainly acrylic, although the same is acrylic, but its load is not the same. This is also a brand of steam room expensive, and some of the main reasons for the cheap. According to professional sources, at present, the best sheet is Guangdong's Jiucheng board and Hong Kong's Yingmei board, but the Jiucheng board is slightly less optional. Followed by the plate in Jiangsu and Zhejiang, the general quality but cheaper. In addition, people in the industry also reminded consumers that they may encounter some manufacturers who say that their steam rooms can be dry steamed and steamed. It is strictly impossible. Dry steam is called a Finnish sauna. Bath, the general use of high temperature, so the current use of the domestic steam room acrylic sheet can not withstand the high temperature of dry steam.
3. Pay attention to the area and height of the room when shopping. If the bathroom area is small, it is best to buy a single steam room. The smallest steam room currently available on the market requires only 4 to 5 square meters of toilet space. The installation of a double steam room requires a bathroom of about 10 square meters. The height of the room must not be less than 2.0 meters.
4. Find out if your home's meter can withstand heavy loads. It is understood that the current steam room power more than 4,500 watts, 4500 watts of single-phase 220V current 20.5A, 6,000 watts above can generally use three-phase power 380V. The smallest one is also 3000 watts, so before deciding to purchase, first find out whether your home's meter can withstand it.
5. Focus on after-sales Due to the complex installation of the steam room and the need for professional installation, we must look for a good after-sales service provider.
Plate Furniture Brand Room
Composite Geomembrane is a new type of anti-seepage material made by infrared ray heat with Geotextile(PET) and Geomembrane (PE .)
Including:
1) One layer geotextile and one layer membrane ; Weight of base geotextile : 100g/m2-1000gm2 ; Thickness of geomembrane :0.1mm-1.5mm .
2) Two layers geotextile and one layer membrane ; Weight of base geotextile : 80g/m2-600gm2 ; Thickness of geomembrane :0.2mm-1.5mm .
3) One layer geotextile and two layers membrane ; Weight of base geotextile : 100g/m2-1000gm2 ; Thickness of geomembrane :0.1mm-0.8mm .
4) Multi-layers : Weight of base geotextile : 100g/m2-1000gm2 ; Thickness of geomembrane :0.1mm-1.5mm .
Composite Geomembrane applied range
1,Landscape engineering: garage top greening, roof garden, football field, golf course, beach project.
2, Municipal engineering: road base, subway, tunnel, landfill.
3, Construction engineering : upper or bottom layer of building foundation, basement wall, bedding filtration and heat insulation.
4, Traffic engineering: highway, railway basement, dam and slope.
Composite Geomembrane technical index
(Confirming GB/T17642-1998 standard)
|
Product weight (g/m2) |
|
|
|
|
|
|
|
||||
|
400 |
500 |
600 |
700 |
800 |
900 |
1000 |
|||||
|
SPEC |
1 layer geotextile+1 layer geomembrane |
150/0.25 |
200/0.3 |
300/0.3 |
300/0.4 |
300/0.5 |
400/0.5 |
400/0.6 |
|||
|
2 layer geotextile+1 layer geomembrane |
100/0.2/100 |
100/0.3/100 |
150/0.3/150 |
200/0.3/200 |
200/0.4/200 |
200/0.5/200 |
200/0.5/250 |
||||
|
Breaking strength ,kN/m |
5.0 |
7.5 |
10.0 |
12.0 |
14.0 |
16.0 |
18.0 |
||||
|
Elongation at break |
30---100 |
||||||||||
|
Tear strength , kN |
0.15 |
0.25 |
0.32 |
0.40 |
0.48 |
0.56 |
0.62 |
||||
|
CBR Mullen burst strength |
1.1 |
1.5 |
1.9 |
2.2 |
2.5 |
2.8 |
3.0 |
||||
|
Vertical permeability coefficient |
k *10-11~k*10-13 |
||||||||||
|
Hydraulic pressure |
0.4~0.6 |
0.6~1.0 |
|||||||||
Certificate
Composite Geomembrane
Composite Geomembrane,Composite Earthwork Film,Composite Geomembrane For Landfill,Pe Composite Geomembrane
Shandong Tianhai New Materials Engineering Co., Ltd , http://www.chinatinhy.com